en	App is not sandboxed

en	Tile

en	System Bus

en	Center

en	Full access

en	Scale

en	Session Bus

en	Devices

en	Fill

en	Full access to /dev

en	Span

en	Network

en	Background

en	Has network access

en	Changes throughout the day

en	Home

en	Primary Color

en	Swap colors

en	Read-only

en	File System

en	Secondary color

en	Add wallpaper

en	Settings

en	Remove wallpaper

en	Can change settings

en	%s has the following permissions built-in. These cannot be altered. If you are concerned about these permissions, consider removing this application.

en	%s requires access to the following system resources. To stop this access, the app must be removed.

en	Add dots

en	Theme

en	%u file and link type that is opened by the app

en	%u file and link types that are opened by the app

en	%s of disk space used.

en	%s is used to open the following types of files and links.

en	Launcher icon size

en	%s of disk space used

en	Look

en	Apps

en	No applications

en	Auto-hide the Launcher

en	Install some…

en	Search apps

en	The launcher will reveal when moving the pointer to the defined hot spot.

en	Open

en	_Default Apps

en	Reveal location:

en	Left side

en	View Details

en	No Apps Found

en	Top left corner

en	_Find in Software

en	Search

en	Receive system searches and send results.

en	Default Apps

en	Other reveal option

en	Reveal sensitivity

en	Removable Media

en	Low

en	Automat_ically Launch Apps

en	Show system notifications.

en	Start apps when media is connected or inserted

en	High

en	Run in Background

en	Some settings have been overriden by an external program, press "Restore Default Behaviors" to reset the behavior and return control to this panel.

en	App Settings

en	Allow activity when the app is closed.

en	App settings cannot be fully enforced for apps which are not sandboxed. These apps may use permissions which are not shown.

en	Restore Default Behaviours

en	Behavior

en	_Open

en	App _Details

en	Horizontal Gradient

en	Take pictures of the screen at any time.

en	Change Wallpaper

en	Permissions

en	Vertical Gradient

en	Solid Color

en	_Search

en	Change the desktop wallpaper.

en	Receive system searches and send results

en	Reproduce sounds.

en	Disabled

en	_Notifications

en	Inhibit Shortcuts

en	Block standard keyboard shortcuts.

en	Show system notifications

en	_Run in Background

en	Allow activity when the app is closed

en	default

en	Take pictures with the camera.

en	Wallpapers

en	Microphone

en	Scr_eenshots

en	Pictures Folder

en	Take pictures of the screen at any time

en	Record audio with the microphone.

en	Change _Wallpaper

en	Colors & Gradients

en	Location Services

en	Change the desktop wallpaper

en	Access device location data.

en	Flickr

en	Built-in Permissions

en	So_unds

en	Reproduce sounds

en	Change the background and theme

en	Wallpaper;Screen;Desktop;Theme;Appearance;Launcher;Unity;Menus;

en	_Inhibit Shortcuts

en	File & Link Associations

en	Block standard keyboard shortcuts

en	Configure Bluetooth settings

en	Camera

en	No results found

en	Take pictures with the camera

en	Set Up New Device

en	C_amera

en	Remove Device

en	_Microphone

en	Connection

en	Record audio with the microphone

en	Paired

en	Type

en	Reset

en	_Location Services

en	How much disk space this application is occupying with app data and caches.

en	Access device location data

en	Re_quired Access

en	Mouse and Touchpad Settings

en	Application

en	Sound Settings

en	System access that is required by the app

en	General

en	Keyboard Settings

en	_File & Link Associations

en	Send Files...

en	Clear Cache…

en	S_torage

en	Browse Files...

en	Control various application permissions and settings

en	Required Access

en	Bluetooth

en	File & Link Associations

en	application;flatpak;permission;setting;

en	Yes

en	No

en	File Types

en	Link Types

en	Bluetooth is disabled

en	Bluetooth is disabled by hardware switch

en	_Reset

en	Storage

en	No Bluetooth adapters found

en	multiple sizes

en	%d × %d

en	Visibility

en	How much disk space this app is occupying with app data and caches

en	App

en	Visibility of “%s”

en	Current background

en	Data

en	Remove '%s' from the list of devices?

en	If you remove the device, you will have to set it up again before next use.

en	Style

en	Cache

en	Other profile…

en	Total

en	Default

en	_Clear Cache

en	Dark

en	Background

en	Add Picture…

en	Appearance

en	Set for all users

en	Create virtual device

en	Background;Wallpaper;Screen;Desktop;Style;Light;Dark;Appearance;

en	Enable

en	No Bluetooth Found

en	Ca_lls

en	_SMS

en	Plug in a dongle to use Bluetooth.

en	Available Profiles for Displays

en	Bluetooth Turned Off

en	Turn on to connect devices and receive file transfers.

en	Available Profiles for Scanners

en	Airplane Mode is On

en	Available Profiles for Printers

en	Select an app for audio CDs

en	Available Profiles for Cameras

en	Bluetooth is disabled when airplane mode is on.

en	Available Profiles for Webcams

en	Select an app for video DVDs

en	Turn Off Airplane Mode

en	Hardware Airplane Mode is On

en	Select an app to run when a music player is connected

en	Available Profiles

en	Device

en	Turn off the Airplane mode switch to enable Bluetooth.

en	Select an app to run when a camera is connected

en	Calibration

en	Select an app for software CDs

en	Bluetooth

en	Turn Bluetooth on and off and connect your devices

en	share;sharing;bluetooth;obex;

en	Camera is Turned Off

en	No applications can capture photos or video.

en	Cannot remove automatically added profile

en	Use of the camera allows applications to capture photos and video. Disabling the camera may cause some applications to not function properly. Allow the applications below to use your camera.

en	No profile

en	No Applications Have Asked for Camera Access

en	Protect your pictures

en	%i year

en	%i years

en	camera;photos;video;webcam;lock;private;privacy;

en	%i month

en	%i months

en	Place your calibration device over the square and press “Start”

en	%i week

en	%i weeks

en	Less than 1 week

en	Move your calibration device to the calibrate position and press “Continue”

en	Move your calibration device to the surface position and press “Continue”

en	Windows software

en	Shut the laptop lid

en	CD _Audio

en	An internal error occurred that could not be recovered.

en	_DVD Video

en	Uncalibrated

en	Tools required for calibration are not installed.

en	The profile could not be generated.

en	This device is not color managed.

en	Music Pla_yer

en	P_hotos

en	The target whitepoint was not obtainable.

en	This device is using manufacturing calibrated data.

en	Complete!

en	This device does not have a profile suitable for whole-screen color correction.

en	Sof_tware

en	Calibration failed!

en	This device has an old profile that may no longer be accurate.

en	_Other Media

en	Not specified

en	You can remove the calibration device.

en	No devices supporting color management detected

en	Do not disturb the calibration device while in progress

en	Display Calibration

en	Display

en	Scanner

en	_Start

en	Add user accounts and change passwords

en	Printer

en	_Resume

en	Play and record sound

en	_Done

en	Camera

en	Laptop Screen

en	Webcam

en	Play audio

en	Record audio

en	Built-in Webcam

en	%s Monitor

en	Detect network devices using mDNS/DNS-SD (Bonjour/zeroconf)

en	Access bluetooth hardware directly

en	%s Scanner

en	Use bluetooth devices

en	%s Camera

en	Add device

en	Use your camera

en	%s Printer

en	%s Webcam

en	Add a virtual device

en	Print documents

en	Enable color management for %s

en	Use any connected joystick

en	Delete device

en	Remove a device

en	Allow connecting to the Docker service

en	Show color profiles for %s

en	Configure network firewall

en	Not calibrated

en	Set this device for all users on this computer

en	Setup and use privileged FUSE filesystems

en	Add profile

en	Default:

en	Colorspace:

en	Update firmware on this device

en	Calibrate…

en	Access hardware information

en	Test profile:

en	Select ICC Profile File

en	Provide entropy to hardware random number generator

en	Remove profile

en	Use hardware-generated random numbers

en	View details

en	_Import

en	Device type:

en	Supported ICC profiles

en	Access files in your home folder

en	Access libvirt service

en	Manufacturer:

en	All files

en	Model:

en	Change system language and region settings

en	Screen

en	Save Profile

en	Change location settings and providers

en	Image files can be dragged on this window to auto-complete the above fields.

en	Access your location

en	Color management settings

en	Read system and application logs

en	United States

en	Access LXD service

en	Germany

en	Use and configure modems

en	Read system mount information and disk quotas

en	France

en	Control music and video players

en	Screen Calibration

en	Spain

en	Change low-level network settings

en	China

en	Calibration Quality

en	Access the NetworkManager service to read and change network settings

en	Select a region

en	Calibration will produce a profile that you can use to color manage your screen. The longer you spend on calibration, the better the quality of the color profile.

en	You will not be able to use your computer while calibration takes place.

en	Read access to network settings

en	Unspecified

en	Quality

en	Select a language

en	Change network settings

en	Approximate Time

en	Read network settings

en	Access the ofono service to read and change network settings for mobile telephony

en	Calibration Device

en	_Region:

en	Select the sensor device you want to use for calibration.

en	Control Open vSwitch hardware

en	Display Type

en	_City:

en	Read from CD/DVD

en	Read, add, change, or remove saved passwords

en	_Network Time

en	Select the type of display that is connected.

en	Profile Whitepoint

en	Access pppd and ppp devices for configuring Point-to-Point Protocol connections

en	Pause or end any process on the system

en	Select a display target white point. Most displays should be calibrated to a D65 illuminant.

en	Set the time one hour ahead.

en	Set the time one hour back.

en	Access USB hardware directly

en	Display Brightness

en	Please set the display to a brightness that is typical for you. Color management will be most accurate at this brightness level.

en	Set the time one minute ahead.

en	Read/write files on removable storage devices

en	Prevent screen sleep/lock

en	Set the time one minute back.

en	Alternatively, you can use the brightness level used with one of the other profiles for this device.

en	Profile Name

en	Access serial port hardware

en	Switch between AM and PM.

en	Restart or power off the device

en	You can use a color profile on different computers, or even create profiles for different lighting conditions.

en	Install, remove and configure software

en	Profile Name:

en	Summary

en	Access Storage Framework service

en	Read process and system information

en	Profile successfully created!

en	Monitor and control any running program

en	Copy profile

en	AM/PM

en	Requires writable media

en	Change the date and time

en	Change time server settings

en	You may find these instructions on how to use the profile on GNU/Linux, Apple OS X and Microsoft Windows systems useful.

en	Change the time zone

en	Add Profile

en	Problems detected. The profile may not work correctly. Show details.

en	Access the UDisks2 service for configuring disks and removable media

en	_Import File…

en	Access energy usage data

en	Read/write access to U2F devices exposed

en	Control various app permissions and settings

en	Each device needs an up to date color profile to be color managed.

en	application;flatpak;permission;setting;default;preferred;media;autorun;cd;dvd;usb;audio;video;disc;removable;device;system;

en	Learn more about color management

en	Remove Background

en	Select a picture

en	_Set for all users

en	Set this profile for all users on this computer

en	_Enable

en	No Desktop Background

en	_Add profile

en	Date and Time

en	Date and Time preferences panel

en	_Calibrate…

en	Calibrate the device

en	_Default

en	_Remove profile

en	Normal

en	Da_rk

en	_View details

en	Counterclockwise

en	Clockwise

en	Unable to detect any devices that can be color managed

en	_Add Picture…

en	180 Degrees

en	LCD

en	Mirror Displays

en	LED

en	Change your background image or the UI colors

en	Monitor

en	CRT

en	Projector

en	%d x %d (%s)

en	Plasma

en	%d x %d

en	LCD (CCFL backlight)

en	Drag to change primary display.

en	Select a monitor to change its properties; drag it to rearrange its placement.

en	Plug in a dongle to use Bluetooth

en	LCD (RGB LED backlight)

en	LCD (white LED backlight)

en	%a %R

en	%a %l:%M %p

en	Turn on to connect devices and receive file transfers

en	Wide gamut LCD (CCFL backlight)

en	Failed to apply configuration: %s

en	Wide gamut LCD (RGB LED backlight)

en	Bluetooth is disabled when airplane mode is on

en	High

en	Could not save the monitor configuration

en	Could not detect displays

en	40 minutes

en	_Turn Off Airplane Mode

en	All displays

en	Medium

en	Could not get screen information

en	30 minutes

en	Turn off the Airplane mode switch to enable Bluetooth

en	_Resolution

en	R_otation

en	15 minutes

en	L_auncher placement

en	Native to display

en	D50 (Printing and publishing)

en	S_ticky edges

en	_Mirror displays

en	D55

en	Note: may limit resolution options

en	D65 (Photography and graphics)

en	_Detect Displays

en	D75

en	Standard Space

en	Change resolution and position of monitors and projectors

en	Test Profile

en	Panel;Projector;xrandr;Screen;Resolution;Refresh;

en	Automatic

en	VESA: %s

en	Low Quality

en	Medium Quality

en	High Quality

en	%d-bit

en	Default RGB

en	Unknown model

en	The next login will attempt to use the standard experience.

en	Default CMYK

en	Default Gray

en	The next login will use the fallback mode intended for unsupported graphics hardware.

en	Fallback

en	_Cancel

en	Vendor supplied factory calibration data

en	Standard

en	Full-screen display correction not possible with this profile

en	This profile may no longer be accurate

en	Color

en	Calibrate the color of your devices, such as displays, cameras or printers

en	Color;ICC;Profile;Calibrate;Printer;Display;

en	Other…

en	Select Language

en	_Select

en	No languages found

en	More…

en	Unlock to Change Settings

en	Some settings must be unlocked before they can be changed.

en	Unlock…

en	Increment Hour

en	Increment Minute

en	Time

en	Decrement Hour

en	Import

en	Decrement Minute

en	Section

en	Overview

en	Default Applications

en	Create a color profile for the selected device

en	The measuring instrument is not detected. Please check it is turned on and correctly connected.

en	The measuring instrument does not support printer profiling.

en	The device type is not currently supported.

en	Version %s

en	Install Updates

en	Learn more

en	Each device needs an up to date color profile to be color managed. %s

en	System Up-To-Date

en	Checking for Updates

en	System Information

en	device;system;information;memory;processor;version;default;application;fallback;preferred;cd;dvd;usb;audio;video;disc;removable;media;autorun;

en	Hotspot

en	24-hour

en	AM / PM

en	Acti_on:

en	Device name

en	OS type

en	UTC%:::z

en	%l:%M %p

en	Disk

en	Calculating...

en	%R

en	%s (%s)

en	Year

en	Month

en	_Other Media...

en	_Never prompt or start programs on media insertion

en	_Add

en	Experience

en	Forced _Fallback Mode

en	Day

en	Volume mute

en	Time Zone

en	Search for a city

en	Change the date and time, including time zone

en	Clock;Timezone;Location;

en	_Web

en	_Mail

en	_Calendar

en	Screenshots

en	M_usic

en	Take a screenshot

en	_Video

en	_Photos

en	Take a screenshot of a window

en	Take a screenshot of an area

en	Low

en	Configure Default Applications

en	Copy a screenshot to clipboard

en	Copy a screenshot of a window to clipboard

en	default;application;preferred;media;

en	Copy a screenshot of an area to clipboard

en	Universal Access

en	Report your problems

en	diagnostics;crash;

en	Change keyboard settings

en	Shortcut;Repeat;Blink;

en	Join

en	Custom Shortcut

en	Mirror

en	_Name:

en	C_ommand:

en	Primary Display

en	Repeat Keys

en	Key presses _repeat when key is held down

en	Landscape

en	Portrait Right

en	_Delay:

en	Portrait Left

en	Language or country

en	_Speed:

en	Landscape (flipped)

en	Repeat keys speed

en	Orientation

en	More Information

en	Resolution

en	Error: some settings cannot be unlocked

en	Refresh Rate

en	_Unlock…

en	Adjust for TV

en	Cursor Blinking

en	Cursor _blinks in text fields

en	Scale

en	S_peed:

en	Night Light unavailable

en	Cursor blink speed

en	This could be the result of the graphics driver being used, or the desktop being used remotely

en	Layout Settings

en	Temporarily Disabled Until Tomorrow

en	Restart Filter

en	Today

en	Night light makes the screen color warmer. This can help to prevent eye strain and sleeplessness.

en	Schedule

en	Yesterday

en	Remove Shortcut

en	To edit a shortcut, click the row and hold down the new keys or press Backspace to clear.

en	%b %e

en	Sunset to Sunrise

en	%b %e, %Y

en	Manual Schedule

en	Shortcuts

en	%1$s, %2$s

en	From

en	%d hour

en	%d hours

en	<Unknown Action>

en	Hour

en	%d minute

en	%d minutes

en	%d second

en	%d seconds

en	Error saving the new shortcut

en	:

en	Minute

en	%s %s %s

en	The shortcut "%s" cannot be used because it will become impossible to type using this key. Please try with a key such as Control, Alt or Shift at the same time.

en	The shortcut "%s" is already used for "%s"

en	%s %s

en	%s

en	If you reassign the shortcut to "%s", the "%s" shortcut will be disabled.

en	_Reassign

en	%s %s

en	To

en	Too many custom shortcuts

en	Color Temperature

en	%s

en	Action

en	0 seconds

en	Choose how to use connected monitors and projectors

en	On

en	Panel;Projector;xrandr;Screen;Resolution;Refresh;Monitor;Night;Light;Blue;redshift;color;sunset;sunrise;

en	Mouse and Touchpad

en	Off

en	Set your mouse and touchpad preferences

en	Trackpad;Pointer;Click;Tap;Double;Button;Trackball;

en	Apply Changes?

en	Changes Cannot be Applied

en	Mouse Preferences

en	This could be due to hardware limitations.

en	_Right-handed

en	Displays

en	_Apply

en	_Left-handed

en	Sh_ow position of pointer when the Control key is pressed

en	Display Settings Disabled

en	Pointer Speed

en	Multiple Displays

en	_Join

en	A_cceleration:

en	_Sensitivity:

en	_Mirror

en	Passed

en	Contains top bar and Activities

en	Failed

en	_Primary Display

en	Device conforms to HSI level %d

en	Drag and Drop

en	_Night Light

en	Thr_eshold:

en	Night Light

en	Security Level 0

en	This device has no protection against hardware security issues. This could be because of a hardware or firmware configuration issue. It is recommended to contact your IT support provider.

en	Drag Threshold

en	Security Level 1

en	This device has minimal protection against hardware security issues. This is the lowest device security level and only provides protection against simple security threats.

en	Security Level 2

en	Double-Click Timeout

en	_Timeout:

en	%.2lf Hz

en	This device has basic protection against hardware security issues. This provides protection against some common security threats.

en	Variable (%d–%.2lf Hz)

en	Double-click timeout

en	Security Level 3

en	To test your settings, try to double-click on the face.

en	This device has extended protection against hardware security issues. This is the highest device security level and provides protection against advanced security threats.

en	Variable (up to %.2lf Hz)

en	Security Level

en	_Orientation

en	_Resolution

en	Disable _touchpad while typing

en	Contact your hardware manufacturer for help with security updates.

en	R_efresh Rate

en	Enable _mouse clicks with touchpad

en	_Variable Refresh Rate

en	It might be possible to resolve this issue in the device’s UEFI firmware settings, or by a support technician.

en	It might be possible to resolve this issue in the device’s UEFI firmware settings.

en	Re_fresh Rate

en	_Disabled

en	It might be possible for a support technician to resolve this issue.

en	_Edge scrolling

en	Adjust for _TV

en	_Scale

en	Two-_finger scrolling

en	Level 1

en	Enable h_orizontal scrolling

en	Level 2

en	Night Light cannot be used from a virtual machine.

en	Night Light Unavailable

en	Level 3

en	Web Proxy Autodiscovery is used when a Configuration URL is not provided.

en	This is not recommended for untrusted public networks.

en	Other...

en	_Schedule

en	_Times

en	Hotspot

en	Exposed to serious security threats.

en	Limited protection against simple security threats.

en	Protected against common security threats.

en	Protected against a wide range of security threats.

en	Comprehensive Protection

en	AM

en	%s VPN

en	PM

en	Firmware Write Protection

en	Network proxy

en	_Color Temperature

en	Firmware Write Protection Lock

en	The system network services are not compatible with this version.

en	Firmware BIOS Region

en	Use Night Light and choose how to use connected monitors and projectors

en	Firmware BIOS Descriptor

en	Network details for %s including password and any custom configuration will be lost

en	Pre-boot DMA Protection

en	Not connected to the internet.

en	Intel BootGuard

en	Create the hotspot anyway?

en	Intel BootGuard Verified Boot

en	Disconnect from %s and create a new hotspot?

en	Intel BootGuard ACM Protected

en	This is your only connection to the internet.

en	Intel BootGuard Error Policy

en	Intel BootGuard Fuse

en	Create _Hotspot

en	Intel CET Enabled

en	Stop hotspot and disconnect any users?

en	_Stop Hotspot

en	Intel CET Active

en	Intel SMAP

en	Encrypted RAM

en	Network settings

en	IOMMU Protection

en	Linux Kernel Lockdown

en	Network;Wireless;IP;LAN;Proxy;

en	Select the interface to use for the new service

en	Linux Kernel Verification

en	Create...

en	Linux Swap

en	Suspend To RAM

en	Interface

en	Suspend To Idle

en	UEFI Platform Key

en	None

en	Manual

en	UEFI Secure Boot

en	Automatic

en	TPM Platform Configuration

en	Add Device

en	TPM Reconstruction

en	TPM v2.0

en	Subnet Mask

en	Intel Management Engine Manufacturing Mode

en	Intel Management Engine Override

en	Intel Management Engine Version

en	Firmware Updates

en	Device Off

en	_Options...

en	Firmware Attestation

en	Firmware Updater Verification

en	Platform Debugging

en	_Network Name

en	Processor Security Checks

en	Security Key

en	AMD Rollback Protection

en	AMD Firmware Replay Protection

en	AMD Firmware Write Protection

en	_Use as Hotspot...

en	Fused Platform

en	_Stop Hotspot...

en	VPN Type

en	Group Name

en	Add Input Source

en	Group Password

en	_Add Input Source…

en	Disable VPN

en	_Configure...

en	View More

en	_Method

en	_Configuration URL

en	_HTTP Proxy

en	H_TTPS Proxy

en	_FTP Proxy

en	Host firmware security status

en	_Socks Host

en	HTTP Port

en	screen;lock;diagnostics;crash;private;recent;temporary;tmp;index;name;network;identity;privacy;

en	HTTPS Port

en	FTP Port

en	Socks Port

en	Apply system wide

en	Wireless

en	Not Available

en	Mobile broadband

en	Mesh

en	Ad-hoc

en	Device Name

en	Infrastructure

en	Left Ctrl

en	Insert

en	Disconnected

en	OS Build ID

en	Includes keyboard layouts and input methods

en	Loading…

en	Methods for entering symbols and letter variants using the keyboard

en	Software Updates

en	A_lternate Characters Key

en	_Compose Key

en	Error logging into the account

en	Rename Device

en	Expired credentials. Please log in again.

en	The device name is used to identify this device when it is viewed over the network, or when pairing Bluetooth devices.

en	_Log In

en	_View and Customize Shortcuts

en	_Rename

en	Add Account

en	All changes to keyboard shortcuts will be lost.

en	To add a new account, first select the account type

en	Account Type:

en	View information about your system

en	_Reset All

en	Search shortcuts

en	device;system;information;hostname;memory;processor;version;default;application;preferred;cd;dvd;usb;audio;video;disc;removable;media;autorun;

en	_Add...

en	Sound and Media

en	Error creating account

en	Search Shortcuts

en	_Reset All…

en	Volume mute/unmute

en	No keyboard shortcut found

en	Are you sure you want to remove the account?

en	Volume down

en	Try a different search

en	Volume up

en	This will not remove the account on the server.

en	Microphone mute/unmute

en	Add Custom Shortcuts

en	Launch media player

en	Set up custom shortcuts for launching apps, running scripts, and more

en	Manage online accounts

en	Play (or play/pause)

en	_Add Shortcut…

en	Google;Facebook;Twitter;Yahoo;Web;Online;Chat;Calendar;Mail;Contact;

en	%s is already being used for %s. If you replace it, %s will be disabled

en	Pause playback

en	Stop playback

en	Previous track

en	Select an account

en	Next track

en	Enter new shortcut to change %s

en	Eject

en	Typing

en	Switch to next input source

en	Switch to previous input source

en	Launchers

en	Charging - %s until fully charged

en	Launch help browser

en	Press Esc to cancel or Backspace to disable the keyboard shortcut

en	Caution low battery, %s remaining

en	Launch calculator

en	Launch email client

en	Using battery power - %s remaining

en	Launch web browser

en	Home folder

en	Using battery power

en	Search

en	Charging - fully charged

en	_Set Shortcut…

en	System

en	Caution low UPS, %s remaining

en	Log out

en	Add a Shortcut

en	Using UPS power - %s remaining

en	Lock screen

en	Caution low UPS

en	Accessibility

en	Turn zoom on or off

en	Using UPS power

en	Your secondary battery is fully charged

en	Zoom in

en	Your secondary battery is empty

en	Zoom out

en	Shortcut;Workspace;Window;Resize;Zoom;Contrast;Input;Source;Lock;Volume;Hotkey;Compose;Character;

en	_Mouse

en	Turn screen reader on or off

en	Turn on-screen keyboard on or off

en	Order of physical buttons on mice and touchpads

en	Increase text size

en	Decrease text size

en	_Left

en	High contrast on or off

en	_Right

en	No input sources found

en	Other

en	Po_inter Speed

en	Add an Input Source

en	Input methods can’t be used on the login screen

en	Slow

en	No input source selected

en	Caution

en	Fast

en	Mouse _Acceleration

en	Options

en	Good

en	Move Up

en	Tip:

en	Recommended for most users and applications

en	Turning mouse acceleration off can allow faster and more precise movements, but can also make the mouse more difficult to use.

en	Move Down

en	Brightness Settings

en	affect how much power is used

en	Preferences

en	Scroll Direction

en	Tra_ditional

en	View Keyboard Layout

en	Scrolling moves the view

en	Power management settings

en	Remove

en	_Natural

en	Power;Sleep;Suspend;Hibernate;Battery;

en	Custom Shortcuts

en	Scrolling moves the content

en	Alternate Characters Key

en	Power off

en	Test Mouse and Touchpad Settings

en	Test _Settings

en	The alternate characters key can be used to enter additional characters. These are sometimes printed as a third-option on your keyboard.

en	5 minutes

en	Left Alt

en	Right Alt

en	_Touchpad

en	10 minutes

en	Left Super

en	T_ouchpad

en	_Disable Touchpad While Typing

en	Right Super

en	1 hour

en	Pointer speed

en	Don't suspend

en	Menu key

en	Clicking

en	Right Ctrl

en	Secondary Click

en	Compose Key

en	When battery is present

en	When battery is charging/in use

en	The compose key allows a wide variety of characters to be entered. To use it, press compose then a sequence of characters. For example, compose key followed by C and o will enter ©, a followed by ' will enter á.

en	Two Finger Push

en	Push anywhere with 2 fingers

en	Caps Lock

en	Scroll Lock

en	On battery power

en	Corner Push

en	Push with a single finger in the corner

en	Print Screen

en	T_ap to Click

en	Suspend when inactive for

en	Input sources can be switched using the %s keyboard shortcut. This can be changed in the keyboard shortcut settings.

en	Input Sources

en	Quickly touch the touchpad to click

en	When power is _critically low

en	Scrolling

en	Includes keyboard layouts and input methods.

en	When the lid is closed

en	Input Source Switching

en	Show battery status in the _menu bar

en	Scroll Method

en	T_wo Finger

en	Use the _same source for all windows

en	Switch input sources _individually for each window

en	Drag two fingers on the touchpad

en	_Edge

en	Special Character Entry

en	Drag one finger on the edge

en	Methods for entering symbols and letter variants using the keyboard.

en	Keyboard Shortcuts

en	T_raditional

en	View and Customize Shortcuts

en	Test Mouse & Touchpad

en	Click Here

en	%d modified

en	%d modified

en	Primary Click

en	Reset All Shortcuts?

en	Double Click

en	Resetting the shortcuts may affect your custom shortcuts. This cannot be undone.

en	Mouse & Touchpad

en	Change your mouse or touchpad sensitivity and select right or left-handed

en	Reset All

en	Reset All…

en	Trackpad;Pointer;Click;Tap;Double;Button;Trackball;Scroll;

en	Paused

en	_Hot Corner

en	Reset all shortcuts to their default keybindings

en	Touch the top-left corner to open the Activities Overview

en	_Active Screen Edges

en	Add a shortcut

en	Drag windows against the top, left, and right screen edges to resize them

en	Workspaces

en	Set up custom shortcuts for launching apps, running scripts, and more.

en	_Dynamic Workspaces

en	Automatically removes empty workspaces

en	Add Shortcut

en	_Fixed Number of Workspaces

en	Toner Level

en	%s is already being used for %s. If you replace it, %s will be disabled

en	Specify a number of permanent workspaces

en	Enter the new shortcut

en	Supply Level

en	_Number of Workspaces

en	Multi-Monitor

en	%u active

en	%u active

en	Set Custom Shortcut

en	Set Shortcut

en	Workspaces on _primary display only

en	No printers available

en	Workspaces on all d_isplays

en	Enter new shortcut to change %s.

en	Add Custom Shortcut

en	Held

en	App Switching

en	_Remove

en	Include apps from all _workspaces

en	Include apps from the _current workspace only

en	Re_place

en	_Set

en	Multitasking

en	Manage preferences for productivity and multitasking

en	Press Esc to cancel or Backspace to disable the keyboard shortcut.

en	Name

en	Multitasking;Multitask;Productivity;Customize;Desktop;Hot Corner;Workspaces;

en	Job Title

en	Automatic

en	Command

en	Shortcut

en	Manual

en	Job State

en	Set Shortcut…

en	Proxy

en	_Save

en	None

en	_Network Proxy

en	Reset the shortcut to its default value

en	C_onfiguration

en	Keyboard

en	Change keyboard shortcuts and set your typing preferences, keyboard layouts and input sources

en	Con_figuration URL

en	Web Proxy Autodiscovery is used when a Configuration URL is not provided. This is not recommended for untrusted public networks.

en	Change printer settings

en	Shortcut;Workspace;Window;Resize;Zoom;Contrast;Input;Source;Lock;Volume;

en	HTTP Proxy

en	Location Services Turned Off

en	No applications can obtain location information.

en	Add a New Printer

en	URL

en	A_ddress:

en	Port

en	Location services allow applications to know your location. Using Wi-Fi and mobile broadband increases accuracy. Uses Mozilla Location Service: Privacy Policy Allow the applications below to determine your location.

en	_Search by Address

en	HTTP proxy port

en	No Applications Have Asked for Location Access

en	HTTPS Proxy

en	Protect your location information

en	Getting devices...

en	HTTPS proxy port

en	location;gps;private;privacy;

en	No local printers found

en	Microphone Turned Off

en	FTP Proxy

en	No network printers found

en	No applications can record sound.

en	FTP proxy port

en	SOCKS Host

en	Use of the microphone allows applications to record and listen to audio. Disabling the microphone may cause some applications to not function properly. Allow the applications below to use your microphone.

en	FirewallD is not running. Network printer detection needs services mdns, ipp, ipp-client and samba-client enabled on firewall.

en	SOCKS host port

en	No Applications Have Asked for Microphone Access

en	Ignored Hosts

en	Local

en	Protect your conversations

en	microphone;recording;application;privacy;

en	Network

en	Network Unavailable

en	Device types

en	An error has occurred and network cannot be used. Error details: NetworkManager not running.

en	Test Your _Settings

en	Automatic configuration

en	VPN

en	Add VPN

en	Primary Button

en	Opening firewall for mDNS connections

en	Sets the order of physical buttons on mice and touchpads.

en	Opening firewall for Samba connections

en	Not set up

en	Left

en	_Proxy

en	Opening firewall for IPP connections

en	Network Name: %s

en	Right

en	Mouse

en	Password: %s

en	Supply

en	Share Network

en	Mouse Speed

en	Natural Scrolling

en	QR Code

en	Scrolling moves the content, not the view.

en	Scan to Connect

en	%s (SSID: %s)

en	Jobs

en	Touchpad

en	Touchpad Speed

en	_Show

en	Insecure network (WEP)

en	Tap to Click

en	Secure network (WPA)

en	Tap to click

en	Print _Test Page

en	Secure network (WPA2)

en	_Options

en	Two-finger Scrolling

en	Secure network (WPA3)

en	Edge Scrolling

en	Secure network

en	Signal strength %d%%

en	Active Print Jobs

en	Try clicking, double clicking, scrolling

en	Connected

en	Five clicks, GEGL time!

en	Resume Printing

en	Pause Printing

en	Double click, primary button

en	Network Options

en	Cancel Print Job

en	Single click, primary button

en	Forget Network

en	Printer Options

en	Double click, middle button

en	Turning on the hotspot will disconnect from %s, and it will not be possible to access the internet through Wi-Fi.

en	Network name cannot be empty

en	Single click, middle button

en	Remove User

en	Double click, secondary button

en	Network name is too long

en	Single click, secondary button

en	Allowed users

en	Must have a minimum of 8 characters

en	Must have a maximum of %d character

en	Must have a maximum of %d characters

en	Add New Printer

en	Sorry! The system printing service doesn't seem to be available.

en	Turn On Wi-Fi Hotspot?

en	Keyboard Layout

en	Wi-Fi hotspot allows others to share your internet connection, by creating a Wi-Fi network that they can connect to. To do this, you must have an internet connection through a source other than Wi-Fi.

en	Change your region and language settings

en	Network Name

en	Touch the top-left corner to open the Activities Overview.

en	Password

en	Language;Layout;Keyboard;

en	Generate Random Password

en	Imperial

en	Autogenerate Password

en	Drag windows against the top, left, and right screen edges to resize them.

en	Choose a Layout

en	_Turn On

en	_Dynamic workspaces

en	Wi-Fi

en	Select an input source to add

en	Turning off will disconnect any devices that are using the hotspot.

en	Automatically removes empty workspaces.

en	Turn Off Hotspot?

en	Keyboard Layout Options

en	_Fixed number of workspaces

en	Specify a number of permanent workspaces.

en	The login screen, system accounts and new user accounts use the system-wide Region and Language settings.

en	_Turn Off

en	Airplane Mode

en	The login screen, system accounts and new user accounts use the system-wide Region and Language settings. You may change the system settings to match yours.

en	Copy Settings

en	Disables Wi-Fi, Bluetooth and mobile broadband

en	Copy Settings...

en	No Wi-Fi Adapter Found

en	Make sure you have a Wi-Fi adapter plugged and turned on

en	Region and Language

en	Application Switching

en	Select a display language (change will be applied next time you log in)

en	Airplane Mode On

en	Install languages...

en	Include applications from all _workspaces

en	Turn off to use Wi-Fi

en	Include applications from the _current workspace only

en	Wi-Fi Hotspot Active

en	Add Language

en	Remove Language

en	Mobile devices can scan the QR code to connect.

en	Language

en	Turn Off Hotspot…

en	Visible Networks

en	Select a region (change will be applied the next time you log in)

en	Oops, something has gone wrong. Please contact your software vendor.

en	Add Region

en	Wi-Fi Unavailable

en	An error has occurred and Wi-Fi cannot be used. Error details: NetworkManager not running.

en	Remove Region

en	NetworkManager needs to be running.

en	802.1x _Security

en	Other Devices

en	_Name

en	Add connection

en	Security

en	Identity

en	Currency

en	Preserve

en	Permanent

en	Examples

en	Stable per SSID

en	Random

en	Stable

en	Add Layout

en	Remove Layout

en	The MAC address entered here will be used as hardware address for the network device this connection is activated on. This feature is known as MAC cloning or spoofing. Example: 00:11:22:33:44:55

en	Profile %d

en	Saved details for “%s” will be permanently lost. This includes passwords and any network changes.

en	Preview Layout

en	Forget Connection?

en	Forget

en	Use the same layout for all windows

en	WEP

en	Allow different layouts for individual windows

en	WPA

en	New windows use the default layout

en	New windows use the previous window's layout

en	WPA3

en	Enhanced Open

en	View and edit keyboard layout options

en	WPA2

en	Reset to De_faults

en	Replace the current keyboard layout settings with the default settings

en	Enterprise

en	None

en	Layouts

en	Display language:

en	Never

en	Input source:

en	%i day ago

en	%i days ago

en	%d Mb/s (%1.1f GHz)

en	Format:

en	%d Mb/s

en	Your settings

en	2.4 GHz / 5 GHz

en	System settings

en	2.4 GHz

en	Layout

en	5 GHz

en	Brightness and Lock

en	None

en	Screen brightness and lock settings

en	Weak

en	Brightness;Lock;Dim;Blank;Monitor;

en	Ok

en	Screen turns off

en	Good

en	30 seconds

en	Excellent

en	IPv4 Address

en	1 minute

en	IPv6 Address

en	2 minutes

en	IP Address

en	3 minutes

en	_Dim screen to save power

en	NetworkManager needs to be running

en	DNS4

en	Brightness

en	DNS6

en	DNS

en	_Turn screen off when inactive for:

en	_Lock screen after:

en	Forget Connection…

en	Remove Connection Profile…

en	Require my password when waking from suspend

en	Remove Connection…

en	Don't lock when at home

en	Remove VPN…

en	Locations...

en	Lock

en	Details

en	Enable debugging code

en	automatic

en	Automatic DNS is enabled. Did you intend to disable Automatic DNS?

en	Version of this application

en	— GNOME Volume Control Applet

en	Delete Address

en	Delete Route

en	Volume Control

en	Show desktop volume control

en	IPv4

en	IPv6

en	Change sound volume and sound events

en	None

en	WEP 40/128-bit Key (Hex or ASCII)

en	Card;Microphone;Volume;Fade;Balance;Bluetooth;Headset;

en	WEP 128-bit Passphrase

en	Bark

en	LEAP

en	Drip

en	Dynamic WEP (802.1x)

en	Glass

en	Sonar

en	WPA & WPA2 Personal

en	WPA & WPA2 Enterprise

en	Sound Output Volume

en	WPA3 Personal

en	WireGuard

en	Unknown

en	Microphone Volume

en	Left

en	Unsaved peer

en	Right

en	Signal Strength

en	Weak

en	Rear

en	Link speed

en	Front

en	1Mb/sec

en	Minimum

en	Hardware Address

en	Maximum

en	_Balance:

en	Supported Frequencies

en	Default Route

en	_Fade:

en	_Subwoofer:

en	Last Used

en	Connect _automatically

en	Forget Connection

en	Unamplified

en	Make available to _other users

en	_Profile:

en	_Metered connection: has data limits or can incur charges

en	Remove Connection Profile

en	Software updates and other large downloads will not be started automatically.

en	Remove VPN

en	_MAC Address

en	M_TU

en	Co_nnector:

en	_Cloned Address

en	Peak detect

en	bytes

en	IPv_4 Method

en	Speaker Testing for %s

en	Automatic (DHCP)

en	Link-Local Only

en	_Test Speakers

en	_Output volume:

en	Disable

en	Shared to other computers

en	C_hoose a device for sound output:

en	Addresses

en	Settings for the selected device:

en	_Input volume:

en	Address

en	Input level:

en	Netmask

en	C_hoose a device for sound input:

en	Gateway

en	Automatic DNS

en	Hardware

en	C_hoose a device to configure:

en	DNS server address(es)

en	Separate IP addresses with commas

en	Sound Effects

en	Routes

en	_Alert volume:

en	Applications

en	Automatic Routes

en	No application is currently playing or recording audio.

en	Metric

en	Use this connection _only for resources on its network

en	Built-in

en	Sound Preferences

en	IPv_6 Method

en	Automatic, DHCP only

en	Testing event sound

en	From theme

en	Prefix

en	Unable to open connection editor: %s

en	C_hoose an alert sound:

en	Stop

en	New Profile

en	Invalid setting %s: %s

en	Invalid setting %s

en	Failed to start Sound Preferences: %s

en	Invalid VPN configuration file

en	_Mute

en	Free and open-source VPN solution designed for ease of use, high speed performance and low attack surface.

en	Import from file…

en	_Sound Preferences

en	Muted

en	S_ecurity

en	Cannot Import VPN Connection

en	No shortcut set

en	The file “%s” could not be read or does not contain recognized VPN connection information Error: %s.

en	Universal Access Preferences

en	_Close

en	Select file to import

en	Keyboard;Mouse;a11y;Accessibility;Contrast;Zoom;Screen Reader;text;font;size;AccessX;Sticky Keys;Slow Keys;Bounce Keys;Mouse Keys;

en	(Error: unable to load VPN connection editor)

en	On screen keyboard

en	Dasher

en	_SSID

en	Nomon

en	_BSSID

en	_Connection Name

en	Caribou

en	_Interface Name

en	75%

en	The name of the wireguard interface to create.

en	Small

en	_Private Key

en	100%

en	Normal

en	The 256 bit private key in base64 encoding

en	Show/hide private key

en	125%

en	_Listen Port

en	Large

en	A port to listen on. If set to 'automatic', the port will be chosen randomly when the interface comes up.

en	150%

en	0

en	Larger

en	GOK

en	_fwmark

en	OnBoard

en	A 32-bit fwmark for outgoing packets. Leave it to 'off' to disable fwmark.

en	Change contrast:

en	_MTU

en	_Add peer routes

en	_Contrast:

en	_Text size:

en	Unable to open connection editor

en	_Peers

en	Add WireGuard peer

en	Increase size:

en	Decrease size:

en	No peers set up

en	Display

en	Options…

en	_Endpoint

en	Turn on or off:

en	An endpoint IP or hostname, followed by a colon, and then a port number.

en	Zoom in:

en	Zoom out:

en	_Public key

en	Cannot import VPN connection

en	A base64 public key calculated by 'wg pubkey' from a private key.

en	Options...

en	_Pre-shared key

en	Zoom

en	A base64 preshared key generated by 'wg genpsk'. Optional, and may be omitted. Adds an additional layer of symmetric-key cryptography to be mixed into the already existing public-key cryptography, for post-quantum resistance.

en	Screen Reader

en	Beep when Caps and Num Lock are used

en	Allowed _IP addresses

en	A file named “%s” already exists.

en	_Replace

en	Comma-separated list of IP (v4 or v6) addresses with CIDR masks from which incoming traffic for this peer is allowed and to which outgoing traffic for this peer is directed.

en	_Persistent keepalive

en	Do you want to replace %s with the VPN connection you are saving?

en	How often to send an authenticated empty packet to the peer for the purpose of keeping a stateful firewall or NAT mapping valid. This is optional and not recommended outside of specific setups.

en	_Test flash

en	Cannot export VPN connection

en	seconds

en	Flash the window title

en	The VPN connection “%s” could not be exported to %s. Error: %s.

en	Apply

en	Export VPN connection

en	Flash the entire screen

en	Control how you connect to the Internet

en	Display a textual description of speech and sounds

en	Network;IP;LAN;Proxy;WAN;Broadband;Modem;Bluetooth;vpn;DNS;

en	Closed Captioning

en	Control how you connect to Wi-Fi networks

en	Network;Wireless;Wi-Fi;Wifi;IP;LAN;Broadband;DNS;Hotspot;

en	Screen keyboard

en	never

en	Typing Assistant

en	today

en	_Turn on accessibility features from the keyboard

en	yesterday

en	Treats a sequence of modifier keys as a key combination

en	Last used

en	_Disable if two keys are pressed together

en	%'d Mb/s

en	Wired

en	Beep when a _modifer key is pressed

en	Sticky Keys

en	Add new connection

en	Network deleted

en	Puts a delay between when a key is pressed and when it is accepted

en	_Undo

en	A_cceptance delay:

en	Network details for the selected networks, including passwords and any custom configuration will be lost.

en	%d network deleted

en	%d networks deleted

en	Slow keys typing delay

en	_Forget

en	Beep when a key is

en	System policy prohibits use as a Hotspot

en	pressed

en	Wireless device does not support Hotspot mode

en	Known Wi-Fi Networks

en	_Forget

en	accepted

en	Add Ethernet Connection

en	rejected

en	IMEI

en	Provider

en	Slow Keys

en	Ignores fast duplicate keypresses

en	Not connected

en	Acc_eptance delay:

en	Active

en	Turn device off

en	Bounce keys typing delay

en	Turn VPN connection off

en	Beep when a key is _rejected

en	Network Name

en	Bounce Keys

en	Security type

en	Type here to test settings

en	Password

en	Turn Wi-Fi off

en	Control the pointer using the keypad

en	Network Proxy

en	Mouse Keys

en	Saved Networks

en	Control the pointer using the video camera.

en	Show Saved Networks

en	_Connect to Hidden Network…

en	Video Mouse

en	Trigger a secondary click by holding down the primary button

en	Connect to hidden network

en	Secondary click delay

en	_Turn On Wi-Fi Hotspot…

en	_Ignore Hosts

en	Saved Wi-Fi Networks

en	Simulated Secondary Click

en	Status unknown

en	Unmanaged

en	D_elay:

en	Unavailable

en	Socks proxy port

en	Motion _threshold:

en	Hover Click

en	Connecting

en	Mouse Settings

en	Authentication required

en	Disconnecting

en	Pointing and Clicking

en	Connection failed

en	Low

en	Normal

en	Status unknown (missing)

en	Configuration failed

en	High

en	More options…

en	High/Inverse

en	IP configuration failed

en	IP configuration expired

en	1/4 Screen

en	Secrets were required, but not provided

en	802.1x supplicant disconnected

en	_Known Wi-Fi Networks

en	Zoom Options

en	802.1x supplicant configuration failed

en	802.1x supplicant failed

en	Magnification:

en	802.1x supplicant took too long to authenticate

en	Follow mouse cursor

en	PPP service failed to start

en	Screen part:

en	Magnifier extends outside of screen

en	PPP service disconnected

en	PPP failed

en	Keep magnifier cursor centered

en	DHCP client failed to start

en	Magnifier cursor pushes contents around

en	Magnifier cursor moves with contents

en	DHCP client error

en	Magnifier Position:

en	DHCP client failed

en	Thickness:

en	Shared connection service failed to start

en	Shared connection service failed

en	AutoIP service failed to start

en	Length:

en	AutoIP service error

en	AutoIP service failed

en	Color:

en	Line busy

en	Crosshairs:

en	Overlaps mouse cursor

en	No dial tone

en	No carrier could be established

en	Dialing request timed out

en	Dialing attempt failed

en	Modem initialization failed

en	Failed to select the specified APN

en	Standard

en	Not searching for networks

en	Administrator

en	Network registration denied

en	Network registration timed out

en	Failed to register with the requested network

en	Create new account

en	PIN check failed

en	_Full name

en	_Account Type

en	Firmware for the device may be missing

en	Connection disappeared

en	Cr_eate

en	Existing connection was assumed

en	Modem not found

en	Bluetooth connection failed

en	SIM Card not inserted

en	SIM Pin required

en	SIM Puk required

en	SIM wrong

en	Connection dependency failed

en	Enable Fingerprint Login

en	Firmware missing

en	Cable unplugged

en	_Notifications

en	Sound _Alerts

en	_Other finger:

en	Notification _Popups

en	Your fingerprint was successfully saved. You should now be able to log in using your fingerprint reader.

en	Notifications will continue to appear in the notification list when popups are disabled

en	User Accounts

en	Add or remove users

en	Show Message _Content in Popups

en	_Lock Screen Notifications

en	Login;Name;Fingerprint;Avatar;Logo;Face;Password;

en	Show Message C_ontent on Lock Screen

en	Choose password at next login

en	_Do Not Disturb

en	_Lock Screen Notifications

en	Log in without a password

en	Disable this account

en	App Notifications

en	Notifications

en	Enable this account

en	_Hint

en	Control which notifications are displayed and what they show

en	Notifications;Banner;Message;Tray;Popup;

en	This hint may be displayed at the login screen. It will be visible to all users of this system. Do not include the password here.

en	Email

en	undefined error in 802.1X security (wpa-eap)

en	C_onfirm password

en	Calendar, Contacts and Files

en	no file selected

en	_New password

en	Enterprise Login

en	Choose a generated password

en	unspecified error validating eap-method file

en	Fair

en	Other

en	DER, PEM, PKCS#12, or PGP private keys

en	Offline — unable to connect accounts

en	DER or PEM certificates

en	Current _password

en	missing EAP-FAST PAC file

en	Allow apps to access online services by connecting your cloud accounts

en	_Action

en	Changing password for

en	PAC files (*.pac)

en	Your Accounts

en	Connect an Account

en	_Show password

en	GTC

en	MSCHAPv2

en	Online Accounts

en	How to choose a strong password

en	Connect to your online accounts and decide what to use them for

en	Anonymous

en	Changing photo for:

en	Authenticated

en	Google;Facebook;Twitter;Yahoo;Web;Online;Chat;Calendar;Mail;Contact;ownCloud;Kerberos;IMAP;SMTP;Pocket;ReadItLater;

en	Both

en	Unknown time

en	Choose a picture that will be shown at the login screen for this account.

en	%i minute

en	%i minutes

en	Anony_mous identity

en	Gallery

en	PAC _file

en	Take a photograph

en	%i hour

en	%i hours

en	Browse

en	Choose a PAC file

en	%i %s %i %s

en	Photograph

en	hour

en	hours

en	_Inner authentication

en	minute

en	minutes

en	Allow automatic PAC pro_visioning

en	%s until fully charged

en	missing EAP-LEAP username

en	Caution: %s remaining

en	missing EAP-LEAP password

en	Account Information

en	Add User Account

en	%s remaining

en	Fully charged

en	Remove User Account

en	Not charging

en	Account _type

en	Sho_w password

en	Empty

en	invalid EAP-PEAP CA certificate: %s

en	Login Options

en	Charging

en	invalid EAP-PEAP CA certificate: no certificate specified

en	MD5

en	Discharging

en	Wireless mouse

en	Version 0

en	Version 1

en	Wireless keyboard

en	User Icon

en	Uninterruptible power supply

en	C_A certificate

en	Choose a Certificate Authority certificate

en	Personal digital assistant

en	Cellphone

en	No CA certificate is _required

en	PEAP _version

en	Media player

en	missing EAP username

en	Tablet

en	Computer

en	missing EAP password

en	Gaming input device

en	missing EAP-TLS identity

en	Battery

en	invalid EAP-TLS CA certificate: %s

en	Main

en	invalid EAP-TLS CA certificate: no certificate specified

en	Extra

en	invalid EAP-TLS private-key: %s

en	%d %%

en	invalid EAP-TLS user-certificate: %s

en	Battery Levels

en	Unencrypted private keys are insecure

en	Failed to create user

en	You are not allowed to access the device. Contact your system administrator.

en	UPS

en	The selected private key does not appear to be protected by a password. This could allow your security credentials to be compromised. Please select a password-protected private key. (You can password-protect your private key with openssl)

en	Battery Level

en	Choose your personal certificate

en	The device is already in use.

en	When _Idle

en	Choose your private key

en	An internal error occurred.

en	I_dentity

en	Suspend

en	Power Off

en	_User certificate

en	Delete registered fingerprints?

en	Hibernate

en	Private _key

en	_Private key password

en	Nothing

en	invalid EAP-TTLS CA certificate: %s

en	When on battery power

en	Done!

en	invalid EAP-TTLS CA certificate: no certificate specified

en	When plugged in

en	Could not access '%s' device

en	Never

en	PAP

en	Could not start finger capture on '%s' device

en	Performance mode temporarily disabled due to high operating temperature.

en	MSCHAP

en	Could not access any fingerprint readers

en	MSCHAPv2 (no EAP)

en	Please contact your system administrator for help.

en	Lap detected: performance mode temporarily unavailable. Move the device to a stable surface to restore.

en	To enable fingerprint login, you need to save one of your fingerprints, using the '%s' device.

en	Performance mode temporarily disabled.

en	CHAP

en	Low battery: power saver enabled. Previous mode will be restored when battery is sufficiently charged.

en	Selecting finger

en	Enrolling fingerprints

en	Power Saver mode activated by “%s”.

en	Unknown error validating 802.1X security

en	Performance mode activated by “%s”.

en	TLS

en	More choices...

en	PWD

en	15 minutes

en	20 minutes

en	FAST

en	Tunneled TLS

en	25 minutes

en	30 minutes

en	Protected EAP (PEAP)

en	Au_thentication

en	You need to enter a new password

en	45 minutes

en	You need to confirm the password

en	Select a file

en	1 hour

en	missing leap-username

en	80 minutes

en	missing leap-password

en	90 minutes

en	You need to enter your current password

en	100 minutes

en	Wi-Fi password is missing.

en	The current password is not correct

en	Too short

en	2 hours

en	_Type

en	missing wep-key

en	Connected Devices

en	Weak

en	Fair

en	Power Mode

en	invalid wep-key: key with a length of %zu must contain only hex-digits

en	invalid wep-key: key with a length of %zu must contain only ascii characters

en	Power Saving

en	Good

en	Strong

en	A_utomatic Screen Brightness

en	invalid wep-key: wrong key length %zu. A key must be either of length 5/13 (ascii) or 10/26 (hex)

en	Adjust screen brightness to the surrounding light

en	invalid wep-key: passphrase must be non-empty

en	Passwords do not match

en	_Dim Screen

en	invalid wep-key: passphrase must be shorter than 64 characters

en	Wrong password

en	Reduce screen brightness when the computer is inactive

en	Disable image

en	1 (Default)

en	Take a photo...

en	Screen _Blank

en	Open System

en	Browse for more pictures...

en	Shared Key

en	Turn the screen off after a period of inactivity

en	Used by %s

en	Automatic Power _Saver

en	_Key

en	Turn on power saver mode when battery power is low

en	A user with name '%s' already exists.

en	Sho_w key

en	WEP inde_x

en	_Automatic Suspend

en	This user does not exist.

en	invalid wpa-psk: invalid key-length %zu. Must be [8,63] bytes or 64 hex digits

en	Pause the computer after a period of inactivity

en	invalid wpa-psk: cannot interpret key with 64 bytes as hex

en	Po_wer Button Behavior

en	Show Battery _Percentage

en	Show exact charge level in the top bar

en	Do you want to keep %s's files?

en	Automatic Suspend

en	Notifications will continue to appear in the notification list when popups are disabled.

en	On _Battery Power

en	_Delay

en	_Plugged In

en	D_elay

en	P_erformance

en	High performance and power usage

en	Ba_lanced

en	Standard performance and power usage

en	To make changes, click the * icon first

en	P_ower Saver

en	Create a user account

en	Reduced performance and power usage

en	%s removed

en	Power

en	To create a user account, click the * icon first

en	Error removing account

en	View your battery status and change power saving settings

en	Close the notification

en	Power;Sleep;Suspend;Hibernate;Battery;Brightness;Dim;Blank;Monitor;DPMS;Idle;Energy;

en	My Account

en	Connect to your data in the cloud

en	Printer “%s” has been deleted

en	Other Accounts

en	Failed to add new printer.

en	No internet connection — connect to set up new online accounts

en	A user with the username '%s' already exists

en	Add an account

en	Unlock to add printers and change settings

en	All Connected and Network Printers

en	%s Account

en	The username is too long

en	Remove Account

en	_Add Printer…

en	The username cannot start with a '-'

en	The username must only consist of: ➣ letters from the English alphabet ➣ digits ➣ any of the characters '.', '-' and '_'

en	Search printers

en	Undo

en	Wacom Graphics Tablet

en	No Printers

en	Set your Wacom tablet preferences

en	No Print Service

en	The system printing service doesn’t seem to be available

en	Tablet (absolute)

en	Printers

en	Touchpad (relative)

en	Tablet Preferences

en	Add printers, view printer jobs and decide how you want to print

en	Printer;Queue;Print;Paper;Ink;Toner;

en	Add Printer

en	Back

en	Bluetooth Settings

en	_Unlock

en	Map to Monitor...

en	No Printers Found

en	Enter a network address or search for a printer

en	Map Buttons...

en	Authentication Required

en	Calibrate...

en	Adjust display resolution

en	Enter username and password to view printers on Print Server

en	Username

en	Tracking Mode

en	Left-Handed Orientation

en	%s Details

en	No suitable driver found

en	No Action

en	Select PPD File

en	Left Mouse Button Click

en	PostScript Printer Description files (*.ppd, *.PPD, *.ppd.gz, *.PPD.gz, *.PPD.GZ)

en	Printer names cannot contain SPACE, TAB, #, or /

en	Scroll Up

en	Location

en	Driver

en	Scroll Down

en	Scroll Left

en	Searching for preferred drivers…

en	Search for Drivers

en	Scroll Right

en	Select from Database…

en	Install PPD File…

en	Stylus

en	Select Printer Driver

en	Loading drivers database…

en	Cancel

en	Batteries

en	Select

en	When _idle

en	Top Button

en	JetDirect Printer

en	LPD Printer

en	Lower Button

en	One Sided

en	Long Edge (Standard)

en	Short Edge (Flip)

en	Portrait

en	Left Ring Mode #%d

en	Right Ring Mode #%d

en	Landscape

en	Automatic suspend

en	Reverse landscape

en	Left Touchstrip Mode #%d

en	Right Touchstrip Mode #%d

en	Reverse portrait

en	Left Touchring Mode Switch

en	Resume

en	Right Touchring Mode Switch

en	Pause

en	Pending

en	Left Touchstrip Mode Switch

en	Paused

en	Right Touchstrip Mode Switch

en	Authentication required

en	Mode Switch #%d

en	Processing

en	Left Button #%d

en	Stopped

en	Right Button #%d

en	Top Button #%d

en	Canceled

en	Bottom Button #%d

en	Aborted

en	Completed

en	Move this job to the top of the queue

en	%u Job Requires Authentication

en	%u Jobs Require Authentication

en	Mis-click detected, restarting...

en	%s — Active Jobs

en	%d of %d

en	Enter credentials to print from %s

en	Output:

en	Map to single monitor

en	Domain

en	Button

en	A_uthenticate

en	Switch Modes

en	Affects system performance and power usage.

en	Clear All

en	Power Saving Options

en	Up

en	_Authenticate

en	Down

en	No Active Printer Jobs

en	Automatic Screen Brightness

en	Display Mapping

en	Unlock Print Server

en	Screen brightness adjusts to the surrounding light.

en	Unlock %s.

en	Dim Screen

en	Enter username and password to view printers on %s.

en	Reduces the screen brightness when the computer is inactive.

en	Show the overview

en	Show help options

en	Searching for Printers

en	USB

en	Turns the screen off after a period of inactivity.

en	Serial Port

en	- System Settings

en	Automatic Power Saver

en	%s Run '%s --help' to see a full list of available command line options.

en	Enables power saver mode when battery is low.

en	Parallel Port

en	Location: %s

en	Control Center

en	Address: %s

en	Pauses the computer after a period of inactivity.

en	System Settings

en	Server requires authentication

en	Two Sided

en	Paper Type

en	Settings for %s

en	Mode:

en	Paper Source

en	Output Tray

en	Play sound through

en	Resolution

en	Settings for the selected device

en	Performance

en	Test:

en	GhostScript pre-filtering

en	High performance and power usage.

en	Pages per side

en	Test Sound

en	Two-sided

en	Record sound from

en	Balanced

en	Key

en	Standard performance and power usage.

en	Orientation

en	General

en	GConf key to which this property editor is attached

en	Power Saver

en	Page Setup

en	Callback

en	Reduced performance and power usage.

en	Installable Options

en	Issue this callback when the value associated with key gets changed

en	Change set

en	Job

en	GConf change set containing data to be forwarded to the gconf client on apply

en	Image Quality

en	Color

en	Conversion to widget callback

en	Finishing

en	Callback to be issued when data are to be converted from GConf to the widget

en	Conversion from widget callback

en	Could not load ui: %s

en	Advanced

en	Test Page

en	Unlock to Add Printers and Change Settings

en	Callback to be issued when data are to be converted to GConf from the widget

en	Test page

en	UI Control

en	Object that controls the property (normally a widget)

en	_Test Page

en	Property editor object data

en	Auto Select

en	Printer Default

en	Custom data required by the specific property editor

en	Property editor data freeing callback

en	Embed GhostScript fonts only

en	Convert to PS level 1

en	Callback to be issued when property editor object data is to be freed

en	Couldn't find the file '%s'. Please make sure it exists and try again, or choose a different background picture.

en	Convert to PS level 2

en	I don't know how to open the file '%s'. Perhaps it's a kind of picture that is not yet supported. Please select a different picture instead.

en	No pre-filtering

en	Enter username and password to view printers on Print Server.

en	Manufacturer

en	Please select an image.

en	No Active Jobs

en	_All Settings

en	Application Menu

en	%u Job

en	%u Jobs

en	Integrated in menu bar and hidden

en	Clean print heads

en	Integrated in menu bar and visible

en	Low on toner

en	Out of toner

en	Low on developer

en	Out of developer

en	Low on a marker supply

en	Out of a marker supply

en	Open cover

en	Open door

en	Low on paper

en	Out of paper

en	Offline

en	Stopped

en	Waste receptacle almost full

en	Waste receptacle full

en	The optical photo conductor is near end of life

en	The optical photo conductor is no longer functioning

en	Ready

en	Does not accept jobs

en	Processing

en	Model

en	Status

en	Ink Level

en	Please restart when the problem is resolved

en	Restart

en	Printing Options

en	Printer Details

en	Use Printer by Default

en	Clean Print Heads

en	Remove Printer

en	Disconnected

en	Connecting

en	Connected

en	Authorization Error

en	Authorizing

en	Enter credentials to print from %s.

en	Reduced Functionality

en	Connected & Authorized

en	Unknown

en	Authorized at

en	Connected at

en	Enrolled at

en	Failed to authorize device:

en	Failed to forget device:

en	Depends on %u other device

en	Depends on %u other devices

en	Device Identifier

en	UUID

en	Timestamp

en	Depends on other devices

en	Authorize and Connect

en	Forget Device

en	Error

en	Authorized

en	The Thunderbolt subsystem (boltd) is not installed or not set up properly.

en	Allow direct access to devices such as docks and external GPUs.

en	Only USB and Display Port devices can attach.

en	Thunderbolt could not be detected. Either the system lacks Thunderbolt support, it has been disabled in the BIOS or is set to an unsupported security level in the BIOS.

en	Thunderbolt support has been disabled in the BIOS.

en	Thunderbolt security level could not be determined.

en	Error switching direct mode: %s

en	Thunderbolt

en	Close notification

en	No Thunderbolt Support

en	Could not connect to the thunderbolt subsystem

en	Direct Access

en	Allow direct access to devices such as docks and external GPUs

en	Pending Devices

en	No devices attached

en	Cameras

en	_Camera Access

en	Allow permitted apps to use cameras

en	Permitted Apps

en	The following sandboxed apps have been given permission to use cameras. Apps that are not sandboxed can use cameras without asking for permission.

en	No sandboxed apps have asked for camera access

en	Sending reports of technical problems helps us improve %s. Reports are sent anonymously and are scrubbed of personal data. %s

en	Diagnostics

en	Problem Reporting

en	_Automatic Problem Reporting

en	Secure Boot is Active

en	Secure boot prevents malicious software from being loaded when the device starts. It is currently turned on and is functioning correctly.

en	Secure Boot Has Problems

en	Secure boot prevents malicious software from being loaded when the device starts. It is currently turned on, but will not work due to having an invalid key.

en	Secure boot problems can often be resolved from your computer's UEFI firmware settings (BIOS) and your hardware manufacturer may provide information on how to do this.

en	For help, contact your hardware manufacturer or IT support provider.

en	Secure Boot is Turned Off

en	Secure boot prevents malicious software from being loaded when the device starts. It is currently turned off.

en	Secure boot can often be turned on from your computer's UEFI firmware settings (BIOS). For help, contact your hardware manufacturer or IT support provider.

en	Secure boot prevents malicious software from being loaded when the device starts. For more information, contact the hardware manufacturer or IT support.

en	Checks Failed

en	Hardware does not pass checks. This means that you are not protected against common hardware security issues. It may be possible to resolve hardware security issues by updating your firmware or changing device configuration options. However, failures can stem from the physical hardware itself, and may not be reversible.

en	Checks Passed

en	This device meets basic security requirements. Its hardware has protection against some of the most common security threats.

en	Protected

en	This device passes current security tests. Its hardware is protected against the majority of security threats.

en	Checks Unavailable

en	Device security checks are not available for this device. It is not possible to tell whether it meets security requirements.

en	Report copied to clipboard

en	_Copy Technical Report

en	About Device Security

en	Device security provides information about how protected your device is against security issues which target the hardware itself. Aspects of hardware that affect security include: • security features that are built into a hardware itself; • how the hardware is configured to protect against security issues; • the security of the software runs directly on the hardware. Security threats which affect hardware include malware and viruses that target the software that runs directly on the hardware. It also includes physical tampering, such as physical connection to the hardware to read data and implant malware. Device security is just one aspect of security, and does not reflect the overall security status of the system and applications.

en	Protected against malicious software when the device starts.

en	Secure Boot has Problems

en	Some protection when the device is started.

en	Secure Boot is Off

en	No protection when the device is started.

en	This issue could have been caused by a change in UEFI firmware settings, an operating system configuration change, or because of malicious software on this system.

en	This issue could have been caused by a change in the UEFI firmware settings, or because of malicious software on this system.

en	Please restart when the problem is resolved.

en	This issue could have been caused by an operating system configuration change, or because of malicious software on this system.

en	%1$s

en	Add Printer…

en	Pass

en	No printers

en	! Fail

en	(%1$s → %2$s)

en	Sorry! The system printing service doesn’t seem to be available.

en	Hardware does not pass checks.

en	Hardware meets basic security requirements.

en	Search locales…

en	Hardware has a good level of protection.

en	Security levels are not available for this device.

en	Device Security

en	Starting Device Security…

en	Searches can be for countries or languages.

en	Device Security Unavailable

en	Device Security is only available on physical hardware. No physical hardware has been detected.

en	Security Events

en	No Events

en	Valid

en	Not Valid

en	Enabled

en	Not Enabled

en	Locked

en	Not Locked

en	Logout…

en	Encrypted

en	Not Encrypted

en	Tainted

en	Not Tainted

en	Found

en	Not Found

en	Select your display language and formats

en	Supported

en	Language;Layout;Keyboard;Input;

en	Not Supported

en	_Automatic Device Location

en	Ask what to do

en	Do nothing

en	Automatic device location uses sources like GPS, Wi-Fi and cellular to determine an approximate location for this device. Location data is sent to Mozilla Location Services as part of this feature.

en	Open folder

en	The following sandboxed apps have been given access to location data. Apps that are not sandboxed can access location data without asking for permission.

en	Other Media

en	No sandboxed apps have asked for location access

en	Select an application for audio CDs

en	Learn about what data is collected, and how it is used.

en	Microphones

en	Select an application for video DVDs

en	Select an application to run when a music player is connected

en	_Microphone Access

en	Allow permitted apps to use microphones

en	Select an application to run when a camera is connected

en	Select an application for software CDs

en	The following sandboxed apps have been given permission to use microphones. Apps that are not sandboxed can use microphones without asking for permission.

en	No sandboxed apps have asked for microphone access

en	audio DVD

en	blank Blu-ray disc

en	Privacy & Security

en	_Screen Lock

en	blank CD disc

en	Automatic screen lock

en	blank DVD disc

en	blank HD DVD disc

en	_Location

en	Control access to your location

en	Blu-ray video disc

en	e-book reader

en	_File History & Trash

en	HD DVD video disc

en	Remove saved data and files

en	Picture CD

en	_Diagnostics

en	Automatic problem reporting

en	Super Video CD

en	_Cameras

en	Video CD

en	Control camera access

en	Select how media should be handled

en	_Microphones

en	Control microphone access

en	CD _audio

en	_DVD video

en	_Thunderbolt

en	Manage device access

en	_Music player

en	_Software

en	Device _Security

en	Hardware security status and information

en	_Other Media…

en	Screen Turns Off

en	Select how other media should be handled

en	30 seconds

en	1 minute

en	_Action:

en	2 minutes

en	_Type:

en	3 minutes

en	Configure Removable Media settings

en	5 minutes

en	30 minutes

en	device;system;default;application;preferred;cd;dvd;usb;audio;video;disc;removable;media;autorun;

en	1 hour

en	1 minute

en	2 minutes

en	3 minutes

en	4 minutes

en	5 minutes

en	8 minutes

en	10 minutes

en	12 minutes

en	15 minutes

en	Never

en	Screen Lock

en	Automatically locking the screen prevents others from accessing the computer while you're away

en	_Blank Screen Delay

en	Period of inactivity until screen blanks

en	Automatic Screen _Lock

en	Locks the screen after it blanks

en	Automatic _Screen Lock Delay

en	Time from screen blank to screen lock

en	Automatically locking the screen prevents others from accessing the computer while you're away.

en	Lock Screen _Notifications

en	Blank Screen Delay

en	Forbid New _USB Devices

en	Prevent new USB devices from interacting with the system when the screen is locked

en	Period of inactivity after which the screen will go blank.

en	Screen Privacy

en	Restrict Viewing _Angle

en	1 hour

en	Period after the screen blanks when the screen is automatically locked.

en	1 day

en	Show _Notifications on Lock Screen

en	Forbid new _USB devices

en	2 days

en	Prevent new USB devices from interacting with the system when the screen is locked.

en	3 days

en	4 days

en	5 days

en	Restrict Viewing Angle

en	Screen Settings

en	6 days

en	7 days

en	screen;lock;private;privacy;

en	14 days

en	30 days

en	Empty all items from Trash?

en	Folders which are searched by system applications, such as Files, Photos and Videos.

en	All items in the Trash will be permanently deleted.

en	Places

en	_Empty Trash

en	Bookmarks

en	Delete all the temporary files?

en	Others

en	All the temporary files will be permanently deleted.

en	_Purge Temporary Files

en	Add Location

en	1 day

en	No applications found

en	7 days

en	Application Search

en	30 days

en	Include application-provided search results.

en	Forever

en	Folders which are searched by system applications.

en	Clear File History?

en	Results are displayed according to the list order.

en	After clearing, lists of recently used files will appear empty.

en	Control which applications show search results in the Activities Overview

en	Clear _History

en	File History & Trash

en	File History

en	File history keeps a record of files that you have used. This information is shared between apps, and makes it easier to find files that you might want to use.

en	File H_istory

en	On

en	File _History Duration

en	_Clear History…

en	Trash & Temporary Files

en	Trash and temporary files can sometimes include personal or sensitive information. Automatically deleting them can help to protect privacy.

en	Automatically Delete _Trash Content

en	Enable media sharing

en	Automatically Delete Temporary _Files

en	Automatically Delete _Period

en	_Empty Trash…

en	When remote login is enabled, remote users can connect using the Secure Shell command: %s

en	_Delete Temporary Files…

en	Enable personal media sharing

en	Control access to your data and hardware, device security

en	Device name copied

en	Privacy;Screen;Lock;Private;Usage;Recent;History;Files;Temporary;Tmp;Trash;Purge;Retain;Diagnostics;Crash;Location;Gps;Camera;Photos;Video;Webcam;Recording;Security;Firmware;Thunderbolt;

en	Location not found

en	Subfolders must be manually added for this location

en	Remove Folder

en	Select Location

en	_Computer Name

en	Search Locations

en	Filesystem locations which are searched by system apps, such as Files

en	Remote _Desktop

en	Default Locations

en	Bookmarked Locations

en	_Remote Login

en	Custom Locations

en	_Add Location…

en	No custom search locations

en	No apps found

en	Remote desktop allows viewing and controlling your desktop from another computer.

en	_App Search

en	Include app-provided search results

en	Enable or disable remote desktop connections to this computer.

en	Remote Control

en	Search _Locations

en	Filesystem locations which are searched by system apps

en	Allows remote connections to control the screen.

en	Search Results

en	Connect to this computer using the device name or remote desktop address.

en	Results are displayed according to the list order

en	Control which apps show search results in the Activities Overview

en	Search;Find;Index;Hide;Privacy;Results;

en	Remote Desktop Address

en	Authentication

en	No networks selected for sharing

en	Off

en	The user name and password are required to connect to this computer.

en	Enabled

en	User Name

en	Active

en	Verify Encryption

en	Choose a Folder

en	Add Folder

en	The encryption fingerprint can be seen in connecting clients and should be identical.

en	File Sharing allows you to share your Public folder with others on your current network using: %s

en	_Device Name

en	Share music, photos and videos over the network.

en	Share files with other devices on the current network

en	_File Sharing

en	Stream music, photos and videos to devices on the current network

en	_Media Sharing

en	File Sharing

en	_Require Password

en	_Password

en	Networks

en	Media Sharing

en	Share music, photos and videos over the network

en	Folders

en	Sharing

en	Control what you want to share with others

en	Rear

en	Front

en	share;sharing;ssh;host;name;remote;desktop;media;audio;video;pictures;photos;movies;server;renderer;

en	Testing %s

en	Custom

en	Click a speaker to test

en	Click

en	Hum

en	System Volume

en	String

en	Swing

en	Alert Sound

en	Balance

en	Fade

en	Configuration

en	Select a Speaker

en	Test Speakers

en	Output

en	_Output Device

en	_Test…

en	_Configuration

en	Master volume

en	O_utput Volume

en	_Balance

en	Fad_e

en	_Subwoofer

en	Output Device

en	No Output Devices

en	Input

en	_Input Device

en	Con_figuration

en	I_nput Volume

en	Input Device

en	No Input Devices

en	Authorized at:

en	Sounds

en	Connected at:

en	Vo_lume Levels

en	Enrolled at:

en	_Alert Sound

en	%s Speaker

en	Subwoofer

en	Volume Levels

en	Unmute

en	Mute

en	Name:

en	100%

en	Status:

en	UUID:

en	Volume

en	Sound

en	Change sound levels, inputs, outputs, and alert sounds

en	Card;Microphone;Volume;Fade;Balance;Bluetooth;Headset;Audio;Output;Input;

en	About

en	System Logo

en	Operating System

en	Hardware Model

en	Processor

en	Memory

en	Disk Capacity

en	Calculating…

en	_System Details

en	Could not connect to the thunderbolt subsystem.

en	Graphics

en	Graphics %d

en	64-bit

en	32-bit

en	X11

en	Wayland

en	Manage Thunderbolt devices

en	Thunderbolt;privacy;

en	Unknown

en	# System Details Report

en	Cursor blinks in text fields.

en	## Report details

en	**Date generated:**

en	## Hardware Information:

en	Cursor blinking speed

en	**Hardware Model:**

en	**Memory:**

en	Cursor size can be combined with zoom to make it easier to see the cursor.

en	**Processor:**

en	**Graphics:**

en	**Graphics %d:**

en	**Disk Capacity:**

en	Short

en	## Software Information:

en	**Firmware Version:**

en	**OS Name:**

en	Long

en	**OS Build:**

en	**OS Type:**

en	**GNOME Version:**

en	Short

en	**Windowing System:**

en	**Kernel Version:**

en	Long

en	Details copied to clipboard

en	Small

en	System Details

en	_Copy

en	Large

en	Hardware Information

en	Key presses repeat when key is held down.

en	Software Information

en	Firmware Version

en	Repeat keys delay

en	OS Name

en	OS Build

en	OS Type

en	GNOME Version

en	Windowing System

en	Beep when a _modifier key is pressed

en	Virtualization

en	Kernel Version

en	_Region & Language

en	System language and localization

en	Short

en	_Date & Time

en	Long

en	Time zone and clock settings

en	Beep when a key is pr_essed

en	_Users

en	Beep when a key is _accepted

en	Add and remove accounts, change password

en	R_emote Desktop

en	Allow this device to be used remotely

en	_Bounce Keys

en	Secu_re Shell

en	Short

en	SSH network access

en	_About

en	Long

en	Hardware details and software versions

en	Software _Updates

en	Turn accessibility features on and off using the keyboard

en	%e %B %Y, %l:%M %p

en	%e %B %Y, %R

en	%s, %s

en	%s (%s)

en	Date & Time

en	_Year

en	_Month

en	_Day

en	Automatic _Date & Time

en	Requires internet access

en	Date & _Time

en	Enable A_nimations

en	Automatic Time _Zone

en	Requires location services enabled and internet access

en	The screen reader reads displayed text as you move the focus.

en	Time Z_one

en	Time _Format

en	_24-hour

en	Beep when Num Lock or Caps Lock are turned on or off.

en	AM / _PM

en	C_ursor Size

en	Clock & Calendar

en	Control how the time and date is shown in the top bar

en	_Week Day

en	D_ate

en	R_epeat Keys

en	_Seconds

en	Week _Numbers

en	Cursor _Blinking

en	_Typing Assist (AccessX)

en	Shown in the dropdown calendar

en	Pointing & Clicking

en	January

en	February

en	March

en	_Click Assist

en	April

en	May

en	June

en	Double-Click Delay

en	July

en	August

en	September

en	Use a visual indication when an alert sound occurs.

en	Flash the entire _screen

en	October

en	November

en	Flash the entire _window

en	Short

en	December

en	¼ Screen

en	Select Time Zone

en	Search cities

en	½ Screen

en	¾ Screen

en	No Results

en	Long

en	Change system time and date settings

en	To change time or date settings, you need to authenticate.

en	Language and time settings, system information

en	device;system;information;details;hostname;memory;processor;version;software;operating;os;model;language;region;country;formats;numbers;units;clock;timezone;date;location;remote;desktop;rdp;vnc;

en	Formats

en	Search locales

en	Common Formats

en	_Magnification:

en	All Formats

en	No Search Results

en	_Follow mouse cursor

en	Searches can be for countries or languages

en	_Screen part:

en	Preview

en	Magnifier _extends outside of screen

en	Imperial

en	_Keep magnifier cursor centered

en	Metric

en	Magnifier cursor _pushes contents around

en	Dates

en	Magnifier cursor moves with _contents

en	Times

en	Dates & Times

en	Numbers

en	_Crosshairs:

en	Measurement

en	_Overlaps mouse cursor

en	_Thickness:

en	Paper

en	Region & Language

en	Thin

en	Language and format will be changed after next login

en	Thick

en	_Length:

en	Log _Out…

en	The language setting is used for interface text and web pages. Formats are used for numbers, dates, and currencies.

en	Co_lor:

en	Your Account

en	_Language

en	Color Effects:

en	_Formats

en	_White on black:

en	Login Screen

en	_Brightness:

en	L_anguage

en	Fo_rmats

en	Co_lor

en	None

en	Device address copied

en	Full

en	Port number copied

en	Username copied

en	Low

en	High

en	Password copied

en	Share your existing desktop with other devices. The remote connection uses the existing screen resolution

en	_Desktop Sharing

en	Color Effects

en	Remote _Control

en	Allows desktop shares to control the screen

en	Keyboard;Mouse;a11y;Accessibility;Universal Access;Contrast;Cursor;Sound;Zoom;Screen;Reader;big;high;large;text;font;size;AccessX;Sticky;Keys;Slow;Bounce;Mouse;Double;click;Delay;Speed;Assist;Repeat;Blink;visual;hearing;audio;typing;animations;

en	How to Connect

en	Use a remote desktop app to connect using the RDP protocol. Additional information about the device’s network location may also be required.

en	_Hostname

en	Copy

en	_Port

en	Login Details

en	_Generate New Password

en	_Verify Encryption

en	Remote Desktop

en	Desktop Sharing

en	Remote Login

en	Some settings are locked

en	Remotely connect to your user account when it isn’t being used. The display resolution can be set from the remote.

en	Use a remote desktop app to connect using the RDP protocol. Additional information about the device's network location may also be required.

en	Encryption Fingerprint

en	The encryption fingerprint can be seen in connecting clients and should be identical

en	Enable or disable remote sessions

en	Authentication is required to enable or disable remote sessions

en	Command copied

en	Secure Shell

en	Access this device using Secure Shell (SSH)

en	SSH Login Command

en	Enable or disable remote login

en	Authentication is required to enable or disable remote login

en	File history keeps a record of files that you have used. This information is shared between applications, and makes it easier to find files that you might want to use.

en	Failed to add account

en	The passwords do not match.

en	Add User

en	_Username

en	Ad_ministrator

en	Administrators have extra abilities, including adding and removing users, changing login settings, and removing software. Parental controls cannot be applied to administrators.

en	User sets password on _first login

en	Set password n_ow

en	Pass_word

en	_Confirm

en	Failed to register account

en	Failed to join domain

en	Don't leave traces

en	usage;recent;history;files;temporary;tmp;private;privacy;trash;purge;retain;

en	No supported way to authenticate with this domain

en	That login name didn’t work

en	Should match the web address of your login provider.

en	That login password didn’t work

en	That hostname didn’t work

en	Failed to log into domain

en	To add an enterprise login account, this device needs to be enrolled with %s. To enroll, have your domain administrator enter their name and password.

en	Valid domain

en	Domain not found

en	That login name didn’t work. Please try again.

en	That login password didn’t work. Please try again.

en	Checking domain…

en	Failed to contact realmd service

en	Add Enterprise Login

en	Unable to find the domain. Maybe you misspelled it?

en	Offline

en	A network connection is needed to add enterprise login accounts.

en	Administrator

en	Administrators can add and remove other users, and can change settings for all users. Parental controls cannot be applied to administrators.

en	Enterprise login allows an existing centrally managed account to be used on this device.

en	User sets password on first login

en	_Domain

en	Should match the web domain of the account provider

en	Set password now

en	Enroll Device

en	Confirm

en	_Enroll

en	User accounts which are managed by a company or organization.

en	Administrator _Name

en	Administrator _Password

en	You are Offline

en	Enterprise login allows an existing centrally managed user account to be used on this device. You can also use this account to access company resources on the internet.

en	Browse for more pictures

en	Select a File…

en	the device needs to be claimed to perform this action

en	the device is already claimed by another process

en	you do not have permission to perform the action

en	no prints have been enrolled

en	Failed to communicate with the device during enrollment

en	Failed to communicate with the fingerprint reader

en	Failed to communicate with the fingerprint daemon

en	Failed to list fingerprints: %s

en	Failed to delete saved fingerprints: %s

en	Ensure the device is properly connected.

en	Left thumb

en	Left middle finger

en	_Left index finger

en	Left ring finger

en	Left little finger

en	Right thumb

en	Right middle finger

en	_Right index finger

en	Right ring finger

en	Right little finger

en	Unknown Finger

en	Complete

en	Fingerprint device disconnected

en	Fingerprint device storage is full

en	Fingerprint is duplicate

en	Failed to enroll new fingerprint

en	Failed to start enrollment: %s

en	Failed to enroll new fingerprint

en	Failed to stop enrollment: %s

en	Repeatedly lift and place your finger on the reader to enroll your fingerprint

en	_Re-enroll this finger…

en	Scan new fingerprint

en	Failed to release fingerprint device %s: %s

en	Problem Reading Device

en	Failed to claim fingerprint device %s: %s

en	Failed to get fingerprint devices: %s

en	Fingerprint Manager

en	Fingerprint

en	_No

en	_Yes

en	Do you want to delete your registered fingerprints so fingerprint login is disabled?

en	No fingerprint device

en	No Fingerprint device

en	Ensure the device is properly connected

en	Fingerprint Device

en	Choose the fingerprint device you want to configure

en	Fingerprint Login

en	Fingerprint login allows you to unlock and log into your computer with your finger

en	_Delete Fingerprints

en	Fingerprint Enroll

en	This Week

en	Please choose another password.

en	Please type your current password again.

en	Last Week

en	%b %e

en	Password could not be changed

en	%b %e, %Y

en	Change Password

en	Ch_ange

en	%s — %s

en	%k:%M

en	Current Password

en	New Password

en	%s, %s

en	Confirm Password

en	Session Ended

en	The passwords do not match

en	Session Started

en	Allow user to change their password on next login

en	%s — Account Activity

en	Set a password now

en	Previous

en	Next

en	Cannot automatically join this type of domain

en	No such domain or realm found

en	Cannot log in as %s at the %s domain

en	Invalid password, please try again

en	Couldn’t connect to the %s domain: %s

en	Account disabled

en	To be set at next login

en	None

en	Remove %s?

en	Unlock to Change This Setting

en	Change Avatar

en	Remove Avatar

en	Pa_ssword

en	_Fingerprint Login

en	A_utomatic Login

en	_Administrator

en	Failed to delete user

en	_Parental Controls

en	Open the Parental Controls app

en	Failed to revoke remotely managed user

en	_Remove User

en	You cannot delete your own account.

en	%s is still logged in

en	The user will not be able to use this device once their account has been removed

en	_Delete Files and Settings

en	Deleting a user while they are logged in can leave the system in an inconsistent state.

en	Users

en	Do you want to keep %s’s files?

en	It is possible to keep the home directory, mail spool and temporary files around when deleting a user account.

en	Other Users

en	_Add User…

en	_Delete Files

en	_Keep Files

en	Add Enterprise User

en	Domain Administrator Login

en	Are you sure you want to revoke remotely managed %s’s account?

en	_Delete

en	In order to use enterprise logins, this computer needs to be enrolled in the domain. Please have your network administrator type their domain password here.

en	Administrator Password

en	Manage user accounts

en	Authentication is required to change user data

en	Logged in

en	The new password needs to be different from the old one.

en	Try changing some letters and numbers.

en	Failed to contact the accounts service

en	Please make sure that the AccountService is installed and enabled.

en	Try changing the password a bit more.

en	This panel must be unlocked to change this setting

en	A password without your user name would be stronger.

en	Try to avoid using your name in the password.

en	Delete the selected user account

en	To delete the selected user account, click the * icon first

en	Try to avoid some of the words included in the password.

en	Try to avoid common words.

en	Unlock to Add Users and Change Settings

en	Try to avoid reordering existing words.

en	Your session needs to be restarted for changes to take effect

en	Try to use more numbers.

en	Restart Now

en	Try to use more uppercase letters.

en	Try to use more lowercase letters.

en	Close

en	Edit avatar

en	Try to use more special characters, like punctuation.

en	Full name

en	Try to use a mixture of letters, numbers and punctuation.

en	Try to avoid repeating the same character.

en	Try to avoid repeating the same type of character: you need to mix up letters, numbers and punctuation.

en	Try to avoid sequences like 1234 or abcd.

en	Password needs to be longer. Try to add more letters, numbers and punctuation.

en	Account Activity

en	Mix uppercase and lowercase and try to use a number or two.

en	Administrators can add and remove other users, and can change settings for all users.

en	Adding more letters, numbers and punctuation will make the password stronger.

en	Authentication failed

en	Open the Parental Controls application.

en	The new password is too short

en	The new password is too simple

en	Remove User…

en	The old and new passwords are too similar

en	Add User…

en	The new password has already been used recently.

en	The new password must contain numeric or special characters

en	No Users Found

en	Unlock to add a user account.

en	The old and new passwords are the same

en	Add or remove users and change your password

en	Your password has been changed since you initially authenticated!

en	The new password does not contain enough different characters

en	Login;Name;Fingerprint;Avatar;Logo;Face;Password;Parental Controls;Screen Time;App Restrictions;Web Restrictions;Usage;Usage Limit;Kid;Child;

en	Unknown error

en	The username should usually only consist of lower case letters from a-z, digits and the following characters: - _

en	Sorry, that user name isn’t available. Please try another.

en	The username is too long.

en	Cursor Size

en	Cursor size can be combined with Zoom to make it easier to see the cursor

en	Sound

en	System volume can be adjusted in %s settings

en	Hearing

en	_Overamplification

en	Allow volume to exceed 100%, with reduced sound quality

en	Visual Alerts

en	Use a visual indication when an alert sound occurs

en	_Visual Alerts

en	_Flash Area

en	Entire Screen

en	Entire Window

en	_Test Flash

en	Test

en	Pointing & Clicking

en	_Mouse Keys

en	Use numeric keypad to move your mouse pointer

en	_Locate Pointer

en	Reveal pointer location by pressing Left Ctrl

en	_Double-Click Delay

en	Short

en	Long

en	Click Assist

en	_Simulated Secondary Click

en	Secondary click by holding down the primary mouse button

en	Acceptance Delay

en	_Hover Click

en	Trigger a click when the pointer hovers

en	Delay

en	Motion Threshold

en	Small

en	Large

en	_Always Show Accessibility Menu

en	Display the accessibility menu in the top bar

en	_Seeing

en	_Hearing

en	To edit a shortcut, choose the “Send Keystroke” action, press the keyboard shortcut button and hold down the new keys or press Backspace to clear.

en	_Typing

en	_Pointing and Clicking

en	_Zoom

en	Please tap the target markers as they appear on screen to calibrate the tablet.

en	Default

en	Medium

en	Large

en	Larger

en	Largest

en	%d pixel

en	%d pixels

en	Seeing

en	_High Contrast

en	Increase color contrast of foreground and background interface elements

en	External pad device

en	_On/Off Shapes

en	Use shapes to indicate state in addition to or instead of color

en	Tablet Mode

en	Reduce _Animation

en	Reduce animations in the user interface to reduce motion

en	_Large Text

en	Left Hand Orientation

en	Increase the size of all text in the user interface

en	Map to Monitor

en	_Cursor Size

en	The size of the cursor can be increased to make it easier to see

en	Keep Aspect Ratio

en	_Sound Keys

en	Calibrate

en	Beep when Num Lock or Caps Lock are turned on or off

en	Always Show Scroll_bars

en	Make scrollbars always visible

en	Please plug in or turn on your Wacom tablet.

en	Tip Pressure Feel

en	Screen _Reader

en	The screen reader reads displayed text as you move the focus

en	Screen _Keyboard

en	Use the on-screen keyboard to type in input fields

en	_Enable by Keyboard

en	Button 1

en	Button 2

en	Turn accessibility features on or off using the keyboard

en	Text Cursor

en	Button 3

en	Eraser Pressure Feel

en	_Cursor Blinking

en	Change if the cursor blinks in text fields

en	_Blink Speed

en	Middle Mouse Button Click

en	Right Mouse Button Click

en	Blink Speed

en	Forward

en	_Test Entry

en	Typing Assist

en	Airbrush stylus with pressure, tilt, and rotation

en	_Repeat Keys

en	Standard stylus with pressure and tilt

en	Key presses repeat when the key is held down

en	Speed

en	Standard stylus with pressure

en	_Sticky Keys

en	Sequences of modifier keys act as a key combination

en	Disable if two keys are pressed together

en	Beep when modifier key is pressed

en	S_low Keys

en	Delay between when a key is pressed and when it is accepted

en	Beep when a key is pressed

en	Beep when a key is accepted

en	Beep when a key is rejected

en	B_ounce Keys

en	Ignore fast duplicate keypresses

en	Zoom

en	_Desktop Zoom

en	Magnify the entire screen

en	Magnifier

en	_Magnification Factor

en	M_agnifier View

en	Follow Mouse Cursor

en	Screen Area

en	_Extend Outside Screen Edges

en	_Screen Area

en	Full Screen

en	Top Half

en	Bottom Half

en	Left Half

en	Right Half

en	_Follow Behavior

en	Moves with Contents

en	Pushes Contents Around

en	Remains Centered

en	Crosshairs

en	_Crosshair Lines

en	Mark the cursor location in the magnifier region using lines

en	_Overlap Mouse Cursor

en	_Thickness

en	Thin

en	Thick

en	Len_gth

en	1/4 screen

en	1/2 Screen

en	3/4 Screen

en	Colo_r

en	Color Filters

en	_Inverted

en	Invert colors in the magnifier region

en	_Brightness

en	Low

en	High

en	Co_ntrast

en	Co_lor

en	Full

en	Make it easier to see, hear, type, point and click

en	Keyboard;Mouse;a11y;Accessibility;Universal Access;Contrast;Cursor;Sound;Zoom;Screen;Reader;big;high;large;text;font;size;AccessX;Sticky;Keys;Slow;Bounce;Mouse;Double;click;Delay;Speed;Assist;Repeat;Blink;Pointer;find;locate;visual;hearing;audio;typing;animations;

en	Map Buttons

en	Map buttons to functions

en	To edit a shortcut, choose the “Send Keystroke” action, press the keyboard shortcut button and hold down the new keys or press Backspace to clear

en	Please tap the target markers as they appear on screen to calibrate the tablet

en	Mis-click detected, restarting…

en	Button %d

en	Application defined

en	Send Keystroke

en	Switch Monitor

en	Show On-Screen Help

en	Tablet mounted on laptop panel

en	Tablet mounted on external display

en	External tablet device

en	All Displays

en	_Tablet Mode

en	Use absolute positioning for the pen

en	_Left Hand Orientation

en	Tablet and Express Keys™ are rotated for left hand use

en	Map _Buttons

en	Map to _Monitor

en	_Keep Aspect Ratio

en	Only use a portion of the tablet surface to keep monitor aspect ratio

en	_Calibrate

en	No tablet detected

en	Please plug in or turn on your Wacom tablet

en	Choose an action when button %d on the stylus is pressed

en	Button %d Mapping

en	_Left Mousebutton Click

en	_Middle Mousebutton Click

en	_Right Mousebutton Click

en	_Back

en	_Forward

en	Tip _Pressure Feel

en	Soft

en	Stylus tip pressure

en	Firm

en	Button _1

en	Button _2

en	Button _3

en	_Eraser Pressure Feel

en	Eraser pressure

en	Airbrush stylus with pressure, tilt, and integrated slider

en	Art pen with pressure, tilt, and rotation

en	Stylus with pressure and tilt

en	Stylus with pressure

en	Wacom Tablet

en	Set button mappings and adjust stylus sensitivity for graphics tablets

en	Tablet;Wacom;Stylus;Eraser;Mouse;

en	New shortcut…

en	Edit

en	Access Points

en	Add

en	APN

en	Operation Cancelled

en	Error: Access denied changing settings

en	Error: Mobile Equipment Error

en	Not Registered

en	Registered

en	Roaming

en	Searching

en	Denied

en	Modem Details

en	Modem Status

en	Carrier

en	Network Type

en	Network Status

en	Own Number

en	Device Details

en	2G Only

en	3G Only

en	4G Only

en	5G Only

en	2G, 3G, 4G, 5G (Preferred)

en	2G, 3G, 4G (Preferred), 5G

en	2G, 3G (Preferred), 4G, 5G

en	2G (Preferred), 3G, 4G, 5G

en	2G, 3G, 4G, 5G

en	2G, 3G, 4G (Preferred)

en	2G, 3G (Preferred), 4G

en	2G (Preferred), 3G, 4G

en	2G, 3G, 4G

en	3G, 4G, 5G (Preferred)

en	3G, 4G (Preferred), 5G

en	3G (Preferred), 4G, 5G

en	3G, 4G, 5G

en	2G, 4G, 5G (Preferred)

en	2G, 4G (Preferred), 5G

en	2G (Preferred), 4G, 5G

en	2G, 4G, 5G

en	2G, 3G, 5G (Preferred)

en	2G, 3G (Preferred), 5G

en	2G (Preferred), 3G, 5G

en	Privacy

en	2G, 3G, 5G

en	3G, 4G (Preferred)

en	3G (Preferred), 4G

en	All Settings

en	Primary Menu

en	3G, 4G

en	2G, 4G (Preferred)

en	2G (Preferred), 4G

en	2G, 4G

en	Help

en	2G, 3G (Preferred)

en	2G (Preferred), 3G

en	2G, 3G

en	2G, 5G (Preferred)

en	2G (Preferred), 5G

en	2G, 5G

en	3G, 5G (Preferred)

en	3G (Preferred), 5G

en	3G, 5G

en	4G, 5G (Preferred)

en	4G (Preferred), 5G

en	4G, 5G

en	Unknown

en	A tuple containing the initial width, height and maximized state of the application window.

en	Unlock SIM card

en	Unlock

en	Please provide PIN code for SIM %d

en	Enter PIN to unlock your SIM card

en	Please provide PUK code for SIM %d

en	Enter PUK to unlock your SIM card

en	Wrong password entered. You have %1$u try left

en	Wrong password entered. You have %1$u tries left

en	You have %u try left

en	You have %u tries left

en	Wrong password entered.

en	PUK code should be an 8 digit number

en	Enter New PIN

en	PIN code should be a 4-8 digit number

en	Unlocking…

en	No SIM

en	Insert a SIM card to use this modem

en	SIM Locked

en	_Mobile Data

en	Access data using mobile network

en	_Data Roaming

en	Use mobile data when roaming

en	_Network Mode

en	N_etwork

en	Advanced

en	_Access Point Names

en	_SIM Lock

en	Lock SIM with PIN

en	M_odem Details

en	Phone failure

en	No connection to phone

en	Operation not allowed

en	Operation not supported

en	SIM not inserted

en	SIM PIN required

en	SIM PUK required

en	SIM failure

en	SIM busy

en	Incorrect password

en	SIM PIN2 required

en	SIM PUK2 required

en	Not found

en	No network service

en	Network timeout

en	GPRS services not allowed

en	Roaming not allowed in this location area

en	Unspecified GPRS error

en	No Error

en	Action Cancelled

en	Access denied

en	Unknown Error

en	Network Mode

en	_Automatic

en	Choose Network

en	Refresh Network Providers

en	SIM %d

en	Enable Mobile Network

en	No WWAN Adapter Found

en	Make sure you have a Wireless Wan/Cellular device

en	Wireless Wan is disabled when airplane mode is on

en	_Turn off Airplane Mode

en	Data Connection

en	SIM card used for internet

en	SIM Lock

en	_Next

en	_Lock SIM with PIN

en	Change PIN

en	New PIN

en	Enter current PIN to change SIM lock settings

en	Mobile Network

en	Configure Telephony and mobile data connections

en	cellular;wwan;telephony;sim;mobile;

en	Utility to configure the GNOME desktop

en	Settings is the primary interface for configuring your system.

en	The GNOME Project

en	Display version number

en	Enable verbose mode

en	Search for the string

en	List possible panel names and exit

en	Panel to display

en	[PANEL] [ARGUMENT…]

en	translator-credits

en	© 1998 %s

en	Settings categories

en	No Results Found

en	Available panels:

en	Main Menu

en	Search settings

en	Warning: Development Version

en	This version of Settings should only be used for development purposes. You may experience incorrect system behavior, data loss, and other unexpected issues.

en	_OK

en	_Keyboard Shortcuts

en	_Help

en	_About Settings

en	General

en	Quit

en	Search

en	Show help

en	Keyboard shortcuts

en	Panels

en	Go back to previous panel

en	Cancel search

en	Preferences;Settings;

en	The identifier for the last Settings panel to be opened

en	The identifier for the last Settings panel to be opened. Unrecognised values will be ignored and the first panel in the list selected.

en	Show warning when running a development build of Settings

en	Whether Settings should show a warning when running a development build.

en	Initial state of the window

en	A tuple containing the initial width, height and maximized state of the app window.

en	%u Output

en	%u Outputs

en	%u Input

en	%u Inputs

en	System Sounds