en	System Bus

en	Tile

en	Zoom

en	Full access

en	Center

en	Session Bus

en	Devices

en	Scale

en	Fill

en	Full access to /dev

en	Span

en	Network

en	Has network access

en	Background

en	Home

en	Changes throughout the day

en	Primary Color

en	Read-only

en	File System

en	Swap colors

en	Secondary color

en	Settings

en	Add wallpaper

en	Can change settings

en	%s has the following permissions built-in. These cannot be altered. If you are concerned about these permissions, consider removing this application.

en	Remove wallpaper

en	Add dots

en	%u file and link type that is opened by the app

en	%u file and link types that are opened by the app

en	%s is used to open the following types of files and links.

en	Theme

en	%s of disk space used

en	%s of disk space used.

en	Launcher icon size

en	Look

en	Applications

en	Auto-hide the Launcher

en	No applications

en	Install some…

en	The launcher will reveal when moving the pointer to the defined hot spot.

en	Reveal location:

en	Open

en	View Details

en	Left side

en	Search

en	Top left corner

en	Other reveal option

en	Receive system searches and send results.

en	Reveal sensitivity

en	Disabled

en	Notifications

en	Low

en	Show system notifications.

en	High

en	Run in Background

en	Run in background

en	Some settings have been overriden by an external program, press "Restore Default Behaviors" to reset the behavior and return control to this panel.

en	Restore Default Behaviours

en	Allow activity when the app is closed.

en	Change Wallpaper

en	Behavior

en	Horizontal Gradient

en	Take pictures of the screen at any time.

en	Sounds

en	Vertical Gradient

en	Reproduce sounds.

en	Change the desktop wallpaper.

en	Solid Color

en	Inhibit Shortcuts

en	Block standard keyboard shortcuts.

en	Camera

en	Take pictures with the camera.

en	Microphone

en	Record audio with the microphone.

en	default

en	Wallpapers

en	Location Services

en	Pictures Folder

en	Access device location data.

en	Built-in Permissions

en	Colors & Gradients

en	Flickr

en	File & Link Associations

en	Storage

en	System access that is required by the app

en	Change the background and theme

en	No results found

en	Wallpaper;Screen;Desktop;Theme;Appearance;Launcher;Unity;Menus;

en	Try a different search

en	File & Link Associations

en	Configure Bluetooth settings

en	File Types

en	Set Up New Device

en	Link Types

en	Remove Device

en	Reset

en	Connection

en	How much disk space this application is occupying with app data and caches.

en	Paired

en	Application

en	Type

en	Data

en	Mouse and Touchpad Settings

en	Cache

en	Sound Settings

en	Total

en	Keyboard Settings

en	Clear Cache…

en	Control various application permissions and settings

en	Send Files...

en	application;flatpak;permission;setting;

en	Browse Files...

en	Bluetooth

en	Select a picture

en	_Cancel

en	Yes

en	No

en	_Open

en	multiple sizes

en	Bluetooth is disabled

en	Bluetooth is disabled by hardware switch

en	%d × %d

en	No Bluetooth adapters found

en	No Desktop Background

en	Current background

en	Visibility

en	Visibility of “%s”

en	Style

en	Light

en	Remove '%s' from the list of devices?

en	If you remove the device, you will have to set it up again before next use.

en	Dark

en	Other profile…

en	Background

en	Add Picture…

en	Appearance

en	Set for all users

en	Background;Wallpaper;Screen;Desktop;Style;Light;Dark;

en	Create virtual device

en	Change your background image or the UI colors

en	No Bluetooth Found

en	Background;Wallpaper;Screen;Desktop;Style;Light;Dark;Appearance;

en	Plug in a dongle to use Bluetooth.

en	Enable

en	Bluetooth Turned Off

en	Turn on to connect devices and receive file transfers.

en	Airplane Mode is On

en	Bluetooth is disabled when airplane mode is on.

en	Available Profiles for Displays

en	Available Profiles for Scanners

en	Turn Off Airplane Mode

en	Hardware Airplane Mode is On

en	Available Profiles for Printers

en	Turn off the Airplane mode switch to enable Bluetooth.

en	Available Profiles for Cameras

en	Bluetooth

en	Available Profiles for Webcams

en	Turn Bluetooth on and off and connect your devices

en	Available Profiles

en	share;sharing;bluetooth;obex;

en	Device

en	Camera is Turned Off

en	Calibration

en	No applications can capture photos or video.

en	Use of the camera allows applications to capture photos and video. Disabling the camera may cause some applications to not function properly. Allow the applications below to use your camera.

en	No Applications Have Asked for Camera Access

en	Protect your pictures

en	screen;lock;diagnostics;crash;private;recent;temporary;tmp;index;name;network;identity;

en	Cannot remove automatically added profile

en	No profile

en	Place your calibration device over the square and press “Start”

en	Move your calibration device to the calibrate position and press “Continue”

en	%i year

en	%i years

en	camera;photos;video;webcam;lock;private;privacy;

en	%i month

en	%i months

en	Move your calibration device to the surface position and press “Continue”

en	%i week

en	%i weeks

en	Shut the laptop lid

en	Less than 1 week

en	An internal error occurred that could not be recovered.

en	Tools required for calibration are not installed.

en	The profile could not be generated.

en	The target whitepoint was not obtainable.

en	Uncalibrated

en	Complete!

en	Calibration failed!

en	This device is not color managed.

en	You can remove the calibration device.

en	This device is using manufacturing calibrated data.

en	Do not disturb the calibration device while in progress

en	This device does not have a profile suitable for whole-screen color correction.

en	Display Calibration

en	This device has an old profile that may no longer be accurate.

en	Not specified

en	_Start

en	No devices supporting color management detected

en	_Resume

en	Display

en	_Done

en	Laptop Screen

en	Scanner

en	Printer

en	Built-in Webcam

en	Camera

en	%s Monitor

en	Webcam

en	%s Scanner

en	%s Camera

en	%s Printer

en	%s Webcam

en	Enable color management for %s

en	Show color profiles for %s

en	Add device

en	Not calibrated

en	Add a virtual device

en	Delete device

en	Default:

en	Remove a device

en	Colorspace:

en	Set this device for all users on this computer

en	Test profile:

en	Add profile

en	Select ICC Profile File

en	_Import

en	Calibrate…

en	Supported ICC profiles

en	All files

en	Remove profile

en	View details

en	Screen

en	Device type:

en	Save Profile

en	Manufacturer:

en	_Save

en	Create a color profile for the selected device

en	Model:

en	The measuring instrument is not detected. Please check it is turned on and correctly connected.

en	Image files can be dragged on this window to auto-complete the above fields.

en	Color management settings

en	The measuring instrument does not support printer profiling.

en	The device type is not currently supported.

en	United States

en	Screen Calibration

en	Calibration Quality

en	Germany

en	Calibration will produce a profile that you can use to color manage your screen. The longer you spend on calibration, the better the quality of the color profile.

en	France

en	You will not be able to use your computer while calibration takes place.

en	Spain

en	China

en	Quality

en	Select a region

en	Approximate Time

en	Calibration Device

en	Unspecified

en	Select a language

en	Select the sensor device you want to use for calibration.

en	Display Type

en	Select the type of display that is connected.

en	_Region:

en	Profile Whitepoint

en	Select a display target white point. Most displays should be calibrated to a D65 illuminant.

en	_City:

en	Display Brightness

en	_Network Time

en	Please set the display to a brightness that is typical for you. Color management will be most accurate at this brightness level.

en	Set the time one hour ahead.

en	Alternatively, you can use the brightness level used with one of the other profiles for this device.

en	Profile Name

en	Set the time one hour back.

en	You can use a color profile on different computers, or even create profiles for different lighting conditions.

en	Set the time one minute ahead.

en	Profile Name:

en	Set the time one minute back.

en	Switch between AM and PM.

en	Summary

en	Profile successfully created!

en	Copy profile

en	Requires writable media

en	You may find these instructions on how to use the profile on GNU/Linux, Apple OS X and Microsoft Windows systems useful.

en	Add Profile

en	AM/PM

en	Problems detected. The profile may not work correctly. Show details.

en	_Import File…

en	_Add

en	Each device needs an up to date color profile to be color managed.

en	Learn more

en	Learn more about color management

en	_Set for all users

en	Set this profile for all users on this computer

en	_Enable

en	_Add profile

en	_Calibrate…

en	Calibrate the device

en	_Remove profile

en	Date and Time

en	_View details

en	Date and Time preferences panel

en	Unable to detect any devices that can be color managed

en	LCD

en	Normal

en	Counterclockwise

en	LED

en	CRT

en	Clockwise

en	180 Degrees

en	Projector

en	Plasma

en	Mirror Displays

en	Monitor

en	LCD (CCFL backlight)

en	%d x %d (%s)

en	LCD (RGB LED backlight)

en	LCD (white LED backlight)

en	%d x %d

en	Wide gamut LCD (CCFL backlight)

en	Drag to change primary display.

en	Wide gamut LCD (RGB LED backlight)

en	Select a monitor to change its properties; drag it to rearrange its placement.

en	%a %R

en	High

en	40 minutes

en	%a %l:%M %p

en	Failed to apply configuration: %s

en	Medium

en	30 minutes

en	Could not save the monitor configuration

en	Could not detect displays

en	All displays

en	15 minutes

en	Native to display

en	Could not get screen information

en	Low

en	_Resolution

en	D50 (Printing and publishing)

en	R_otation

en	D55

en	D65 (Photography and graphics)

en	L_auncher placement

en	S_ticky edges

en	D75

en	Standard Space

en	_Mirror displays

en	Note: may limit resolution options

en	Test Profile

en	_Detect Displays

en	Automatic

en	Low Quality

en	Medium Quality

en	Change resolution and position of monitors and projectors

en	Panel;Projector;xrandr;Screen;Resolution;Refresh;

en	High Quality

en	Default RGB

en	VESA: %s

en	Default CMYK

en	%d-bit

en	Default Gray

en	Vendor supplied factory calibration data

en	Unknown model

en	Full-screen display correction not possible with this profile

en	The next login will attempt to use the standard experience.

en	The next login will use the fallback mode intended for unsupported graphics hardware.

en	This profile may no longer be accurate

en	Color

en	Fallback

en	Standard

en	Calibrate the color of your devices, such as displays, cameras or printers

en	Color;ICC;Profile;Calibrate;Printer;Display;

en	Other…

en	Select Language

en	_Select

en	No languages found

en	More…

en	Unlock to Change Settings

en	Some settings must be unlocked before they can be changed.

en	Unlock…

en	Increment Hour

en	Increment Minute

en	Time

en	Decrement Hour

en	Decrement Minute

en	Today

en	Yesterday

en	%b %e

en	%b %e, %Y

en	%d hour

en	%d hours

en	%d minute

en	%d minutes

en	Section

en	%d second

en	%d seconds

en	Overview

en	%s %s %s

en	%s %s

en	%s

en	%s %s

en	Version %s

en	Install Updates

en	%s

en	0 seconds

en	System Up-To-Date

en	Checking for Updates

en	Hotspot

en	24-hour

en	System Information

en	AM / PM

en	%e %B %Y, %l:%M %p

en	device;system;information;memory;processor;version;default;application;fallback;preferred;cd;dvd;usb;audio;video;disc;removable;media;autorun;

en	%e %B %Y, %R

en	%s, %s

en	Acti_on:

en	%s (%s)

en	UTC%:::z

en	Device name

en	%l:%M %p

en	%R

en	OS type

en	%s (%s)

en	Disk

en	Date & Time

en	Year

en	Calculating...

en	Month

en	January

en	February

en	March

en	April

en	May

en	June

en	July

en	August

en	September

en	October

en	_Other Media...

en	November

en	December

en	Day

en	Experience

en	Time Zone

en	Search for a city

en	Forced _Fallback Mode

en	Automatic _Date & Time

en	Volume mute

en	Requires internet access

en	Date & _Time

en	Automatic Time _Zone

en	Requires location services enabled and internet access

en	Time Z_one

en	Time _Format

en	Change the date and time, including time zone

en	Clock;Timezone;Location;

en	Change system time and date settings

en	To change time or date settings, you need to authenticate.

en	_Web

en	_Mail

en	_Calendar

en	M_usic

en	_Video

en	_Photos

en	Default Applications

en	Configure Default Applications

en	Screenshots

en	default;application;preferred;media;

en	Take a screenshot

en	Take a screenshot of a window

en	Sending reports of technical problems helps us improve %s. Reports are sent anonymously and are scrubbed of personal data. %s

en	Problem Reporting

en	Take a screenshot of an area

en	Copy a screenshot to clipboard

en	_Automatic Problem Reporting

en	Diagnostics

en	Copy a screenshot of a window to clipboard

en	Copy a screenshot of an area to clipboard

en	Report your problems

en	screen;lock;diagnostics;crash;private;recent;temporary;tmp;index;name;network;identity;privacy;

en	On

en	Off

en	Universal Access

en	Apply Changes?

en	diagnostics;crash;

en	Changes Cannot be Applied

en	This could be due to hardware limitations.

en	_Apply

en	Display Settings Disabled

en	Display Arrangement

en	Multiple Displays

en	Join

en	Back

en	Contains top bar and Activities

en	Change keyboard settings

en	Primary Display

en	Shortcut;Repeat;Blink;

en	Night Light

en	Mirror

en	Custom Shortcut

en	Landscape

en	_Name:

en	Portrait Right

en	Portrait Left

en	C_ommand:

en	Landscape (flipped)

en	%.2lf Hz

en	Key presses _repeat when key is held down

en	_Delay:

en	Orientation

en	Resolution

en	_Speed:

en	Short

en	Refresh Rate

en	Slow

en	Adjust for TV

en	Scale

en	Long

en	Temporarily Disabled Until Tomorrow

en	Fast

en	Restart Filter

en	Night light makes the screen color warmer. This can help to prevent eye strain and sleeplessness.

en	Cursor _blinks in text fields

en	Sunset to Sunrise

en	S_peed:

en	Night Light unavailable

en	Cursor blink speed

en	Manual Schedule

en	This could be the result of the graphics driver being used, or the desktop being used remotely

en	Times

en	Layout Settings

en	From

en	Hour

en	Remove Shortcut

en	:

en	Schedule

en	To edit a shortcut, click the row and hold down the new keys or press Backspace to clear.

en	Minute

en	Shortcuts

en	AM

en	PM

en	To

en	<Unknown Action>

en	Color Temperature

en	Error saving the new shortcut

en	Displays

en	The shortcut "%s" cannot be used because it will become impossible to type using this key. Please try with a key such as Control, Alt or Shift at the same time.

en	Choose how to use connected monitors and projectors

en	Panel;Projector;xrandr;Screen;Resolution;Refresh;Monitor;Night;Light;Blue;redshift;color;sunset;sunrise;

en	The shortcut "%s" is already used for "%s"

en	If you reassign the shortcut to "%s", the "%s" shortcut will be disabled.

en	Unknown

en	_Reassign

en	%s; Build ID: %s

en	64-bit

en	Too many custom shortcuts

en	Action

en	32-bit

en	X11

en	Wayland

en	Mouse and Touchpad

en	Secure Boot is Active

en	Unknown

en	Set your mouse and touchpad preferences

en	System Logo

en	Trackpad;Pointer;Click;Tap;Double;Button;Trackball;

en	Secure boot prevents malicious software from being loaded when the device starts. It is currently turned on and is functioning correctly.

en	Device Name

en	Mouse Preferences

en	Secure Boot Has Problems

en	Hardware Model

en	Secure boot prevents malicious software from being loaded when the device starts. It is currently turned on, but will not work due to having an invalid key.

en	_Right-handed

en	Memory

en	Secure boot problems can often be resolved from your computer's UEFI firmware settings (BIOS) and your hardware manufacturer may provide information on how to do this.

en	Processor

en	_Left-handed

en	For help, contact your hardware manufacturer or IT support provider.

en	Secure Boot is Turned Off

en	Sh_ow position of pointer when the Control key is pressed

en	Graphics

en	Pointer Speed

en	Secure boot prevents malicious software from being loaded when the device starts. It is currently turned off.

en	Disk Capacity

en	A_cceleration:

en	Calculating…

en	Secure boot can often be turned on from your computer's UEFI firmware settings (BIOS). For help, contact your hardware manufacturer or IT support provider.

en	Secure boot prevents malicious software from being loaded when the device starts. For more information, contact the hardware manufacturer or IT support.

en	OS Name

en	_Sensitivity:

en	Low

en	OS Type

en	Passed

en	GNOME Version

en	Failed

en	High

en	Windowing System

en	Device conforms to HSI level %d

en	Drag and Drop

en	Thr_eshold:

en	Security Level 0

en	Virtualization

en	Small

en	This device has no protection against hardware security issues. This could be because of a hardware or firmware configuration issue. It is recommended to contact your IT support provider.

en	Software Updates

en	Drag Threshold

en	Security Level 1

en	Rename Device

en	Large

en	This device has minimal protection against hardware security issues. This is the lowest device security level and only provides protection against simple security threats.

en	The device name is used to identify this device when it is viewed over the network, or when pairing Bluetooth devices.

en	_Rename

en	Double-Click Timeout

en	Security Level 2

en	This device has basic protection against hardware security issues. This provides protection against some common security threats.

en	_Timeout:

en	About

en	View information about your system

en	Security Level 3

en	Double-click timeout

en	device;system;information;hostname;memory;processor;version;default;application;preferred;cd;dvd;usb;audio;video;disc;removable;media;autorun;

en	This device has extended protection against hardware security issues. This is the highest device security level and provides protection against advanced security threats.

en	To test your settings, try to double-click on the face.

en	Sound and Media

en	Security Level

en	Disable _touchpad while typing

en	Volume mute/unmute

en	Security levels are not available for this device.

en	Volume down

en	Contact your hardware manufacturer for help with security updates.

en	Enable _mouse clicks with touchpad

en	Volume up

en	It might be possible to resolve this issue in the device’s UEFI firmware settings, or by a support technician.

en	Scrolling

en	_Disabled

en	It might be possible to resolve this issue in the device’s UEFI firmware settings.

en	Microphone mute/unmute

en	Launch media player

en	It might be possible for a support technician to resolve this issue.

en	_Edge scrolling

en	Play (or play/pause)

en	Two-_finger scrolling

en	Level 1

en	Enable h_orizontal scrolling

en	Pause playback

en	Level 2

en	Level 3

en	Stop playback

en	Previous track

en	Protected against malicious software when the device starts.

en	Next track

en	Secure Boot has Problems

en	Eject

en	Some protection when the device is started.

en	Other...

en	Secure Boot is Off

en	Typing

en	No protection when the device is started.

en	Switch to next input source

en	This issue could have been caused by a change in UEFI firmware settings, an operating system configuration change, or because of malicious software on this system.

en	Switch to previous input source

en	Launchers

en	This issue could have been caused by a change in the UEFI firmware settings, or because of malicious software on this system.

en	This issue could have been caused by an operating system configuration change, or because of malicious software on this system.

en	Launch help browser

en	Hotspot

en	Exposed to serious security threats.

en	Launch calculator

en	Launch email client

en	Limited protection against simple security threats.

en	Protected against common security threats.

en	Launch web browser

en	Home folder

en	Protected against a wide range of security threats.

en	Search

en	Comprehensive Protection

en	No Events

en	%s VPN

en	System

en	Log out

en	Proxy

en	Firmware Write Protection

en	Network proxy

en	Lock screen

en	Firmware Write Protection Lock

en	Firmware BIOS Region

en	The system network services are not compatible with this version.

en	Accessibility

en	Firmware BIOS Descriptor

en	Turn zoom on or off

en	Network details for %s including password and any custom configuration will be lost

en	Zoom in

en	Pre-boot DMA Protection

en	Forget

en	Not connected to the internet.

en	Intel BootGuard

en	Zoom out

en	Intel BootGuard Verified Boot

en	Turn screen reader on or off

en	Create the hotspot anyway?

en	Turn on-screen keyboard on or off

en	Intel BootGuard ACM Protected

en	Disconnect from %s and create a new hotspot?

en	Intel BootGuard Error Policy

en	Increase text size

en	This is your only connection to the internet.

en	Intel BootGuard Fuse

en	Decrease text size

en	Create _Hotspot

en	High contrast on or off

en	Intel CET Enabled

en	No input sources found

en	Intel CET Active

en	Intel SMAP

en	Other

en	Add an Input Source

en	Encrypted RAM

en	Input methods can’t be used on the login screen

en	IOMMU Protection

en	Network settings

en	No input source selected

en	Linux Kernel Lockdown

en	Network;Wireless;IP;LAN;Proxy;

en	Select the interface to use for the new service

en	Move Up

en	Linux Kernel Verification

en	Create...

en	Move Down

en	Linux Swap

en	Suspend To RAM

en	Preferences

en	Interface

en	View Keyboard Layout

en	Suspend To Idle

en	Remove

en	UEFI Platform Key

en	None

en	Custom Shortcuts

en	Manual

en	UEFI Secure Boot

en	Alternate Characters Key

en	TPM Platform Configuration

en	Automatic

en	Add Device

en	TPM Reconstruction

en	The alternate characters key can be used to enter additional characters. These are sometimes printed as a third-option on your keyboard.

en	TPM v2.0

en	Left Alt

en	Subnet Mask

en	Right Alt

en	Intel Management Engine Manufacturing Mode

en	Left Super

en	Intel Management Engine Override

en	Intel Management Engine Version

en	Right Super

en	Menu key

en	Firmware Updates

en	Device Off

en	Firmware Attestation

en	Right Ctrl

en	_Options...

en	Firmware Updater Verification

en	Compose Key

en	The compose key allows a wide variety of characters to be entered. To use it, press compose then a sequence of characters. For example, compose key followed by C and o will enter ©, a followed by ' will enter á.

en	_Network Name

en	Platform Debugging

en	Processor Security Checks

en	Caps Lock

en	Security Key

en	Scroll Lock

en	AMD Rollback Protection

en	Forget Network

en	Print Screen

en	AMD Firmware Replay Protection

en	AMD Firmware Write Protection

en	_Use as Hotspot...

en	Input sources can be switched using the %s keyboard shortcut. This can be changed in the keyboard shortcut settings.

en	_Stop Hotspot...

en	Input Sources

en	Fused Platform

en	Includes keyboard layouts and input methods.

en	Valid

en	Input Source Switching

en	Not Valid

en	Use the _same source for all windows

en	Not Enabled

en	VPN Type

en	Locked

en	Switch input sources _individually for each window

en	Group Name

en	Special Character Entry

en	Not Locked

en	Methods for entering symbols and letter variants using the keyboard.

en	Group Password

en	Encrypted

en	Not Encrypted

en	Keyboard Shortcuts

en	Disable VPN

en	View and Customize Shortcuts

en	Tainted

en	%d modified

en	%d modified

en	_Configure...

en	Not Tainted

en	Found

en	_Method

en	Reset All Shortcuts?

en	Resetting the shortcuts may affect your custom shortcuts. This cannot be undone.

en	Not Found

en	Cancel

en	Supported

en	Reset All

en	Not Supported

en	Device Security

en	Reset All…

en	Host firmware security status

en	Reset all shortcuts to their default keybindings

en	Add Custom Shortcuts

en	HTTP Port

en	Set up custom shortcuts for launching apps, running scripts, and more.

en	HTTPS Port

en	Add Shortcut

en	FTP Port

en	No keyboard shortcut found

en	Socks Port

en	%s is already being used for %s. If you replace it, %s will be disabled

en	Apply system wide

en	Enter the new shortcut

en	Set Custom Shortcut

en	Wireless

en	Not Available

en	Mobile broadband

en	Set Shortcut

en	Mesh

en	Enter new shortcut to change %s.

en	Add Custom Shortcut

en	Ad-hoc

en	Infrastructure

en	Add

en	Replace

en	Set

en	Press Esc to cancel or Backspace to disable the keyboard shortcut.

en	Name

en	Command

en	Disconnected

en	Shortcut

en	OS Build ID

en	Set Shortcut…

en	None

en	Reset the shortcut to its default value

en	Loading…

en	Keyboard

en	Change keyboard shortcuts and set your typing preferences, keyboard layouts and input sources

en	Shortcut;Workspace;Window;Resize;Zoom;Contrast;Input;Source;Lock;Volume;

en	Not connected

en	Location Services Turned Off

en	Error logging into the account

en	No applications can obtain location information.

en	Location services allow applications to know your location. Using Wi-Fi and mobile broadband increases accuracy. Uses Mozilla Location Service: Privacy Policy Allow the applications below to determine your location.

en	Expired credentials. Please log in again.

en	_Log In

en	No Applications Have Asked for Location Access

en	Add Account

en	Protect your location information

en	To add a new account, first select the account type

en	Screen Turns Off

en	30 seconds

en	Account Type:

en	1 minute

en	_Add...

en	2 minutes

en	Error creating account

en	3 minutes

en	Are you sure you want to remove the account?

en	5 minutes

en	30 minutes

en	This will not remove the account on the server.

en	1 hour

en	_Remove

en	1 minute

en	Manage online accounts

en	2 minutes

en	Google;Facebook;Twitter;Yahoo;Web;Online;Chat;Calendar;Mail;Contact;

en	3 minutes

en	4 minutes

en	Select an account

en	5 minutes

en	8 minutes

en	10 minutes

en	12 minutes

en	15 minutes

en	Never

en	Automatically locking the screen prevents others from accessing the computer while you're away.

en	Blank Screen Delay

en	Charging - %s until fully charged

en	Caution low battery, %s remaining

en	Period of inactivity after which the screen will go blank.

en	Using battery power - %s remaining

en	Automatic Screen _Lock

en	Automatic _Screen Lock Delay

en	Period after the screen blanks when the screen is automatically locked.

en	Using battery power

en	Charging - fully charged

en	Show _Notifications on Lock Screen

en	Forbid new _USB devices

en	Caution low UPS, %s remaining

en	Prevent new USB devices from interacting with the system when the screen is locked.

en	Using UPS power - %s remaining

en	Lock your screen

en	Screen Lock

en	Caution low UPS

en	Microphone Turned Off

en	Using UPS power

en	Your secondary battery is fully charged

en	No applications can record sound.

en	Use of the microphone allows applications to record and listen to audio. Disabling the microphone may cause some applications to not function properly. Allow the applications below to use your microphone.

en	Your secondary battery is empty

en	No Applications Have Asked for Microphone Access

en	Protect your conversations

en	Test Your _Settings

en	General

en	Primary Button

en	Sets the order of physical buttons on mice and touchpads.

en	Left

en	Right

en	Mouse

en	Mouse Speed

en	Caution

en	Good

en	Natural Scrolling

en	Options

en	Scrolling moves the content, not the view.

en	Tip:

en	Touchpad

en	Brightness Settings

en	affect how much power is used

en	Touchpad Speed

en	Tap to Click

en	Two-finger Scrolling

en	Power management settings

en	Edge Scrolling

en	Power;Sleep;Suspend;Hibernate;Battery;

en	Try clicking, double clicking, scrolling

en	Power off

en	5 minutes

en	Single click, primary button

en	10 minutes

en	Single click, middle button

en	1 hour

en	Don't suspend

en	Single click, secondary button

en	When battery is present

en	Mouse & Touchpad

en	Change your mouse or touchpad sensitivity and select right or left-handed

en	When battery is charging/in use

en	On battery power

en	_Hot Corner

en	Touch the top-left corner to open the Activities Overview.

en	_Active Screen Edges

en	Suspend when inactive for

en	When power is _critically low

en	Drag windows against the top, left, and right screen edges to resize them.

en	Workspaces

en	When the lid is closed

en	Show battery status in the _menu bar

en	_Dynamic workspaces

en	Automatically removes empty workspaces.

en	_Fixed number of workspaces

en	Specify a number of permanent workspaces.

en	_Number of Workspaces

en	Multi-Monitor

en	Workspaces on _primary display only

en	Workspaces on all d_isplays

en	Application Switching

en	Include applications from all _workspaces

en	Include applications from the _current workspace only

en	Multitasking

en	Manage preferences for productivity and multitasking

en	Multitasking;Multitask;Productivity;Customize;Desktop;

en	Paused

en	Oops, something has gone wrong. Please contact your software vendor.

en	NetworkManager needs to be running.

en	Add a shortcut

en	Other Devices

en	VPN

en	Not set up

en	%s (SSID: %s)

en	Insecure network (WEP)

en	Toner Level

en	Secure network (WPA)

en	Supply Level

en	Secure network (WPA2)

en	Secure network (WPA3)

en	%u active

en	%u active

en	No printers available

en	Secure network

en	Connected

en	Held

en	Options…

en	Turning on the hotspot will disconnect from %s, and it will not be possible to access the internet through Wi-Fi.

en	Must have a minimum of 8 characters

en	Re_place

en	Must have a maximum of %d character

en	Must have a maximum of %d characters

en	Turn On Wi-Fi Hotspot?

en	Wi-Fi hotspot allows others to share your internet connection, by creating a Wi-Fi network that they can connect to. To do this, you must have an internet connection through a source other than Wi-Fi.

en	Network Name

en	Job Title

en	Password

en	Job State

en	Generate Random Password

en	Autogenerate Password

en	_Turn On

en	Wi-Fi

en	Stop hotspot and disconnect any users?

en	_Stop Hotspot

en	Change printer settings

en	Airplane Mode

en	Add a New Printer

en	Disables Wi-Fi, Bluetooth and mobile broadband

en	A_ddress:

en	No Wi-Fi Adapter Found

en	Make sure you have a Wi-Fi adapter plugged and turned on

en	_Search by Address

en	Airplane Mode On

en	location;gps;private;privacy;

en	Getting devices...

en	Turn off to use Wi-Fi

en	No local printers found

en	Wi-Fi Hotspot Active

en	Mobile devices can scan the QR code to connect.

en	No network printers found

en	FirewallD is not running. Network printer detection needs services mdns, ipp, ipp-client and samba-client enabled on firewall.

en	Turn Off Hotspot…

en	Visible Networks

en	Local

en	NetworkManager needs to be running

en	Network

en	802.1x _Security

en	microphone;recording;application;privacy;

en	Device types

en	Security

en	Automatic configuration

en	Preserve

en	Opening firewall for mDNS connections

en	Permanent

en	Random

en	Opening firewall for Samba connections

en	Stable

en	Opening firewall for IPP connections

en	The MAC address entered here will be used as hardware address for the network device this connection is activated on. This feature is known as MAC cloning or spoofing. Example: 00:11:22:33:44:55

en	Profile %d

en	Supply

en	WEP

en	WPA

en	_Default

en	WPA3

en	Jobs

en	Enhanced Open

en	_Show

en	WPA2

en	Enterprise

en	Print _Test Page

en	None

en	Tap to click

en	_Options

en	Never

en	_Back

en	%i day ago

en	%i days ago

en	Active Print Jobs

en	Resume Printing

en	Five clicks, GEGL time!

en	Double click, primary button

en	Pause Printing

en	Cancel Print Job

en	Printer Options

en	Double click, middle button

en	Remove User

en	Double click, secondary button

en	Allowed users

en	Add New Printer

en	Sorry! The system printing service doesn't seem to be available.

en	Keyboard Layout

en	Trackpad;Pointer;Click;Tap;Double;Button;Trackball;Scroll;

en	Change your region and language settings

en	Language;Layout;Keyboard;

en	Imperial

en	Choose a Layout

en	Select an input source to add

en	Keyboard Layout Options

en	The login screen, system accounts and new user accounts use the system-wide Region and Language settings.

en	automatic

en	The login screen, system accounts and new user accounts use the system-wide Region and Language settings. You may change the system settings to match yours.

en	Identity

en	Copy Settings

en	Delete Address

en	Copy Settings...

en	Region and Language

en	Delete Route

en	Select a display language (change will be applied next time you log in)

en	IPv4

en	IPv6

en	Install languages...

en	Add Language

en	None

en	Remove Language

en	WEP 40/128-bit Key (Hex or ASCII)

en	Language

en	WEP 128-bit Passphrase

en	Multitasking;Multitask;Productivity;Customize;Desktop;Hot Corner;Workspaces;

en	LEAP

en	Select a region (change will be applied the next time you log in)

en	Add Region

en	Dynamic WEP (802.1x)

en	WPA & WPA2 Personal

en	Remove Region

en	WPA & WPA2 Enterprise

en	WPA3 Personal

en	Add connection

en	Signal Strength

en	Currency

en	Link speed

en	Hardware Address

en	Supported Frequencies

en	Examples

en	Default Route

en	Last Used

en	Add Layout

en	Remove Layout

en	Connect _automatically

en	Make available to _other users

en	_Metered connection: has data limits or can incur charges

en	Preview Layout

en	Software updates and other large downloads will not be started automatically.

en	_Name

en	Use the same layout for all windows

en	Allow different layouts for individual windows

en	_MAC Address

en	M_TU

en	New windows use the default layout

en	New windows use the previous window's layout

en	_Cloned Address

en	View and edit keyboard layout options

en	bytes

en	IPv_4 Method

en	Reset to De_faults

en	Replace the current keyboard layout settings with the default settings

en	Automatic (DHCP)

en	Layouts

en	Link-Local Only

en	Manual

en	Display language:

en	Disable

en	Input source:

en	Shared to other computers

en	Format:

en	Addresses

en	Your settings

en	System settings

en	Address

en	Netmask

en	Layout

en	Brightness and Lock

en	Automatic DNS

en	Screen brightness and lock settings

en	Separate IP addresses with commas

en	Brightness;Lock;Dim;Blank;Monitor;

en	Screen turns off

en	Routes

en	Automatic Routes

en	30 seconds

en	1 minute

en	Metric

en	2 minutes

en	Use this connection _only for resources on its network

en	IPv_6 Method

en	3 minutes

en	Automatic, DHCP only

en	_Dim screen to save power

en	Brightness

en	Prefix

en	Unable to open connection editor

en	_Turn screen off when inactive for:

en	New Profile

en	_Lock screen after:

en	Require my password when waking from suspend

en	Import from file…

en	Don't lock when at home

en	Add VPN

en	S_ecurity

en	Locations...

en	Lock

en	Cannot import VPN connection

en	The file “%s” could not be read or does not contain recognized VPN connection information Error: %s.

en	Enable debugging code

en	Version of this application

en	Select file to import

en	— GNOME Volume Control Applet

en	A file named “%s” already exists.

en	_Replace

en	Volume Control

en	Show desktop volume control

en	Do you want to replace %s with the VPN connection you are saving?

en	Cannot export VPN connection

en	Change sound volume and sound events

en	The VPN connection “%s” could not be exported to %s. Error: %s.

en	Export VPN connection

en	Card;Microphone;Volume;Fade;Balance;Bluetooth;Headset;

en	(Error: unable to load VPN connection editor)

en	_SSID

en	_BSSID

en	%d Mb/s (%1.1f GHz)

en	%d Mb/s

en	Control how you connect to the Internet

en	2.4 GHz / 5 GHz

en	Network;IP;LAN;Proxy;WAN;Broadband;Modem;Bluetooth;vpn;DNS;

en	Control how you connect to Wi-Fi networks

en	2.4 GHz

en	Sound Output Volume

en	5 GHz

en	Network;Wireless;Wi-Fi;Wifi;IP;LAN;Broadband;DNS;Hotspot;

en	None

en	Microphone Volume

en	never

en	Left

en	Weak

en	today

en	Ok

en	yesterday

en	Right

en	Last used

en	Good

en	Rear

en	Front

en	Excellent

en	Wired

en	Minimum

en	IPv4 Address

en	Add new connection

en	IPv6 Address

en	Maximum

en	Network details for the selected networks, including passwords and any custom configuration will be lost.

en	_Forget

en	_Balance:

en	IP Address

en	Known Wi-Fi Networks

en	DNS4

en	_Fade:

en	_Forget

en	DNS6

en	_Subwoofer:

en	DNS

en	System policy prohibits use as a Hotspot

en	Unamplified

en	Wireless device does not support Hotspot mode

en	Forget Connection

en	Remove Connection Profile

en	Web Proxy Autodiscovery is used when a Configuration URL is not provided.

en	_Profile:

en	This is not recommended for untrusted public networks.

en	Remove VPN

en	Details

en	Turn device off

en	IMEI

en	Co_nnector:

en	Provider

en	Peak detect

en	Network Proxy

en	_HTTP Proxy

en	Speaker Testing for %s

en	H_TTPS Proxy

en	_FTP Proxy

en	_Test Speakers

en	_Socks Host

en	_Output volume:

en	_Ignore Hosts

en	C_hoose a device for sound output:

en	Settings for the selected device:

en	HTTP proxy port

en	_Input volume:

en	HTTPS proxy port

en	Input level:

en	FTP proxy port

en	Socks proxy port

en	C_hoose a device for sound input:

en	_Configuration URL

en	Hardware

en	Turn VPN connection off

en	C_hoose a device to configure:

en	Sound Effects

en	Network Name

en	Security type

en	_Alert volume:

en	Password

en	No application is currently playing or recording audio.

en	Turn Wi-Fi off

en	Built-in

en	_Connect to Hidden Network…

en	_Turn On Wi-Fi Hotspot…

en	Sound Preferences

en	Testing event sound

en	_Known Wi-Fi Networks

en	Status unknown

en	From theme

en	C_hoose an alert sound:

en	Unmanaged

en	Stop

en	Unavailable

en	Connecting

en	Authentication required

en	Failed to start Sound Preferences: %s

en	Disconnecting

en	Connection failed

en	_Mute

en	Status unknown (missing)

en	_Sound Preferences

en	Configuration failed

en	Muted

en	IP configuration failed

en	No shortcut set

en	IP configuration expired

en	Universal Access Preferences

en	Secrets were required, but not provided

en	Keyboard;Mouse;a11y;Accessibility;Contrast;Zoom;Screen Reader;text;font;size;AccessX;Sticky Keys;Slow Keys;Bounce Keys;Mouse Keys;

en	802.1x supplicant disconnected

en	On screen keyboard

en	802.1x supplicant configuration failed

en	802.1x supplicant failed

en	Dasher

en	802.1x supplicant took too long to authenticate

en	Nomon

en	PPP service failed to start

en	Caribou

en	Gateway

en	75%

en	PPP service disconnected

en	PPP failed

en	Automatic

en	Small

en	DHCP client failed to start

en	100%

en	Normal

en	DNS server address(es)

en	DHCP client error

en	DHCP client failed

en	125%

en	Large

en	Shared connection service failed to start

en	150%

en	Shared connection service failed

en	AutoIP service failed to start

en	Larger

en	GOK

en	AutoIP service error

en	AutoIP service failed

en	OnBoard

en	Change contrast:

en	Line busy

en	No dial tone

en	No carrier could be established

en	_Text size:

en	Increase size:

en	Dialing request timed out

en	Decrease size:

en	Dialing attempt failed

en	Invalid setting %s: %s

en	Modem initialization failed

en	Display

en	Invalid setting %s

en	Turn on or off:

en	Failed to select the specified APN

en	Not searching for networks

en	Zoom in:

en	Network registration denied

en	Zoom out:

en	Network registration timed out

en	Options...

en	Zoom

en	Screen Reader

en	PIN check failed

en	Beep when Caps and Num Lock are used

en	Firmware for the device may be missing

en	Connection disappeared

en	Use a visual indication when an alert sound occurs

en	Existing connection was assumed

en	Modem not found

en	Bluetooth connection failed

en	Flash the window title

en	Flash the entire screen

en	SIM Card not inserted

en	SIM Pin required

en	Display a textual description of speech and sounds

en	SIM Puk required

en	SIM wrong

en	Closed Captioning

en	Connection dependency failed

en	Screen keyboard

en	Firmware missing

en	Cable unplugged

en	Typing Assistant

en	_Turn on accessibility features from the keyboard

en	undefined error in 802.1X security (wpa-eap)

en	no file selected

en	DER, PEM, or PKCS#12 private keys (*.der, *.pem, *.p12, *.key)

en	unspecified error validating eap-method file

en	DER or PEM certificates (*.der, *.pem, *.crt, *.cer)

en	Beep when a _modifer key is pressed

en	Sticky Keys

en	missing EAP-FAST PAC file

en	PAC files (*.pac)

en	GTC

en	Beep when a key is

en	MSCHAPv2

en	Anonymous

en	pressed

en	Authenticated

en	accepted

en	Both

en	rejected

en	Slow Keys

en	Anony_mous identity

en	PAC _file

en	Choose a PAC file

en	Acc_eptance delay:

en	_Inner authentication

en	Active

en	Allow automatic PAC pro_visioning

en	missing EAP-LEAP username

en	Bounce Keys

en	Type here to test settings

en	missing EAP-LEAP password

en	_Username

en	Control the pointer using the keypad

en	_Password

en	Mouse Keys

en	Control the pointer using the video camera.

en	Sho_w password

en	Video Mouse

en	invalid EAP-PEAP CA certificate: %s

en	invalid EAP-PEAP CA certificate: no certificate specified

en	MD5

en	Version 0

en	Simulated Secondary Click

en	Version 1

en	C_A certificate

en	Choose a Certificate Authority certificate

en	Hover Click

en	No CA certificate is _required

en	PEAP _version

en	Mouse Settings

en	Pointing and Clicking

en	missing EAP username

en	missing EAP password

en	Normal

en	missing EAP-TLS identity

en	invalid EAP-TLS CA certificate: %s

en	More options…

en	invalid EAP-TLS CA certificate: no certificate specified

en	High/Inverse

en	invalid EAP-TLS private-key: %s

en	1/4 Screen

en	1/2 Screen

en	invalid EAP-TLS user-certificate: %s

en	3/4 Screen

en	Unencrypted private keys are insecure

en	The selected private key does not appear to be protected by a password. This could allow your security credentials to be compromised. Please select a password-protected private key. (You can password-protect your private key with openssl)

en	Magnification:

en	Choose your personal certificate

en	Follow mouse cursor

en	Choose your private key

en	Screen part:

en	I_dentity

en	Magnifier extends outside of screen

en	_User certificate

en	Keep magnifier cursor centered

en	Private _key

en	_Private key password

en	Magnifier cursor pushes contents around

en	Magnifier cursor moves with contents

en	invalid EAP-TTLS CA certificate: %s

en	invalid EAP-TTLS CA certificate: no certificate specified

en	Thickness:

en	PAP

en	MSCHAP

en	Thin

en	Thick

en	MSCHAPv2 (no EAP)

en	Length:

en	CHAP

en	_Domain

en	Color:

en	Crosshairs:

en	Unknown error validating 802.1X security

en	Overlaps mouse cursor

en	TLS

en	PWD

en	FAST

en	Tunneled TLS

en	Protected EAP (PEAP)

en	Au_thentication

en	Select a file

en	Standard

en	Administrator

en	missing leap-username

en	missing leap-password

en	Create new account

en	Wi-Fi password is missing.

en	_Type

en	_Full name

en	_Account Type

en	missing wep-key

en	invalid wep-key: key with a length of %zu must contain only hex-digits

en	Cr_eate

en	invalid wep-key: key with a length of %zu must contain only ascii characters

en	invalid wep-key: wrong key length %zu. A key must be either of length 5/13 (ascii) or 10/26 (hex)

en	invalid wep-key: passphrase must be non-empty

en	invalid wep-key: passphrase must be shorter than 64 characters

en	1 (Default)

en	Open System

en	Shared Key

en	_Key

en	Enable Fingerprint Login

en	Sho_w key

en	Failed to register with the requested network

en	WEP inde_x

en	invalid wpa-psk: invalid key-length %zu. Must be [8,63] bytes or 64 hex digits

en	invalid wpa-psk: cannot interpret key with 64 bytes as hex

en	_Other finger:

en	Your fingerprint was successfully saved. You should now be able to log in using your fingerprint reader.

en	Sound _Alerts

en	User Accounts

en	Add or remove users

en	Login;Name;Fingerprint;Avatar;Logo;Face;Password;

en	Notifications will continue to appear in the notification list when popups are disabled.

en	Show Message _Content in Popups

en	Choose password at next login

en	Log in without a password

en	Show Message C_ontent on Lock Screen

en	_Do Not Disturb

en	Disable this account

en	Enable this account

en	_Lock Screen Notifications

en	_Hint

en	Control which notifications are displayed and what they show

en	Notifications;Banner;Message;Tray;Popup;

en	This hint may be displayed at the login screen. It will be visible to all users of this system. Do not include the password here.

en	C_onfirm password

en	%s removed

en	_New password

en	Other

en	Choose a generated password

en	Error removing account

en	Fair

en	Undo

en	DER, PEM, PKCS#12, or PGP private keys

en	Current _password

en	DER or PEM certificates

en	Connect to your data in the cloud

en	No internet connection — connect to set up new online accounts

en	_Action

en	Changing password for

en	Add an account

en	%s Account

en	_Show password

en	Remove Account

en	How to choose a strong password

en	Online Accounts

en	Changing photo for:

en	Connect to your online accounts and decide what to use them for

en	Choose a picture that will be shown at the login screen for this account.

en	Google;Facebook;Twitter;Yahoo;Web;Online;Chat;Calendar;Mail;Contact;ownCloud;Kerberos;IMAP;SMTP;Pocket;ReadItLater;

en	Gallery

en	Unknown time

en	Take a photograph

en	%i minute

en	%i minutes

en	Browse

en	%i hour

en	%i hours

en	%i %s %i %s

en	Photograph

en	hour

en	hours

en	minute

en	minutes

en	%s until fully charged

en	Account Information

en	Caution: %s remaining

en	Add User Account

en	%s remaining

en	Remove User Account

en	Account _type

en	Fully charged

en	Not charging

en	Login Options

en	Empty

en	Charging

en	Discharging

en	User Icon

en	Wireless mouse

en	Wireless keyboard

en	Uninterruptible power supply

en	Personal digital assistant

en	Cellphone

en	Media player

en	Tablet

en	Computer

en	Gaming input device

en	Battery

en	Main

en	Extra

en	Batteries

en	Failed to create user

en	When _idle

en	You are not allowed to access the device. Contact your system administrator.

en	Suspend

en	The device is already in use.

en	Power Off

en	An internal error occurred.

en	Hibernate

en	Delete registered fingerprints?

en	Nothing

en	When on battery power

en	When plugged in

en	Never

en	Done!

en	Automatic suspend

en	Could not access '%s' device

en	Could not start finger capture on '%s' device

en	Could not access any fingerprint readers

en	Please contact your system administrator for help.

en	To enable fingerprint login, you need to save one of your fingerprints, using the '%s' device.

en	Selecting finger

en	Enrolling fingerprints

en	15 minutes

en	20 minutes

en	More choices...

en	25 minutes

en	30 minutes

en	45 minutes

en	1 hour

en	You need to enter a new password

en	80 minutes

en	You need to confirm the password

en	The passwords do not match

en	90 minutes

en	You need to enter your current password

en	100 minutes

en	2 hours

en	The current password is not correct

en	Too short

en	Power Mode

en	Weak

en	Affects system performance and power usage.

en	Power Saving Options

en	Fair

en	Good

en	Automatic Screen Brightness

en	Strong

en	Screen brightness adjusts to the surrounding light.

en	Passwords do not match

en	Dim Screen

en	Reduces the screen brightness when the computer is inactive.

en	Wrong password

en	Screen _Blank

en	Disable image

en	Take a photo...

en	Turns the screen off after a period of inactivity.

en	Browse for more pictures...

en	Automatic Power Saver

en	Enables power saver mode when battery is low.

en	Used by %s

en	A user with name '%s' already exists.

en	_Automatic Suspend

en	Pauses the computer after a period of inactivity.

en	This user does not exist.

en	Po_wer Button Behavior

en	Show Battery _Percentage

en	_Notifications

en	Automatic Suspend

en	_Plugged In

en	Do you want to keep %s's files?

en	Notification _Popups

en	Delay

en	Performance

en	High performance and power usage.

en	_Lock Screen Notifications

en	Balanced

en	Standard performance and power usage.

en	Power Saver

en	Reduced performance and power usage.

en	Power

en	To make changes, click the * icon first

en	View your battery status and change power saving settings

en	Create a user account

en	To create a user account, click the * icon first

en	Printer “%s” has been deleted

en	Failed to add new printer.

en	Close the notification

en	Could not load ui: %s

en	My Account

en	Unlock to Add Printers and Change Settings

en	Printers

en	Other Accounts

en	Add printers, view printer jobs and decide how you want to print

en	A user with the username '%s' already exists

en	Printer;Queue;Print;Paper;Ink;Toner;

en	The username is too long

en	Add Printer

en	The username cannot start with a '-'

en	The username must only consist of: ➣ letters from the English alphabet ➣ digits ➣ any of the characters '.', '-' and '_'

en	_Unlock

en	No Printers Found

en	Wacom Graphics Tablet

en	Set your Wacom tablet preferences

en	Enter a network address or search for a printer

en	Authentication Required

en	Tablet (absolute)

en	Enter username and password to view printers on Print Server.

en	Touchpad (relative)

en	Username

en	Tablet Preferences

en	%s Details

en	No suitable driver found

en	Please plug in or turn on your Wacom tablet

en	Select PPD File

en	PostScript Printer Description files (*.ppd, *.PPD, *.ppd.gz, *.PPD.gz, *.PPD.GZ)

en	Bluetooth Settings

en	Location

en	Driver

en	Map to Monitor...

en	Searching for preferred drivers…

en	Map Buttons...

en	Search for Drivers

en	Calibrate...

en	Adjust display resolution

en	Select from Database…

en	Tracking Mode

en	Install PPD File…

en	Left-Handed Orientation

en	Select Printer Driver

en	Loading drivers database…

en	No Action

en	Select

en	Left Mouse Button Click

en	JetDirect Printer

en	LPD Printer

en	Scroll Up

en	One Sided

en	Long Edge (Standard)

en	Scroll Down

en	Scroll Left

en	Short Edge (Flip)

en	Scroll Right

en	Portrait

en	Landscape

en	Reverse landscape

en	Stylus

en	Reverse portrait

en	Pending

en	Paused

en	Authentication required

en	Top Button

en	Processing

en	Lower Button

en	Stopped

en	Canceled

en	Aborted

en	Completed

en	Move this job to the top of the queue

en	Left Ring Mode #%d

en	%u Job Requires Authentication

en	%u Jobs Require Authentication

en	Right Ring Mode #%d

en	%s — Active Jobs

en	Left Touchstrip Mode #%d

en	Performance mode temporarily disabled due to high operating temperature.

en	Right Touchstrip Mode #%d

en	Enter credentials to print from %s.

en	Domain

en	Left Touchring Mode Switch

en	Lap detected: performance mode temporarily unavailable. Move the device to a stable surface to restore.

en	A_uthenticate

en	Performance mode temporarily disabled.

en	Right Touchring Mode Switch

en	Clear All

en	Low battery: power saver enabled. Previous mode will be restored when battery is sufficiently charged.

en	Left Touchstrip Mode Switch

en	_Authenticate

en	Power Saver mode activated by “%s”.

en	Right Touchstrip Mode Switch

en	Mode Switch #%d

en	Performance mode activated by “%s”.

en	Unlock Print Server

en	Left Button #%d

en	Unlock %s.

en	Right Button #%d

en	Enter username and password to view printers on %s.

en	Top Button #%d

en	Bottom Button #%d

en	Searching for Printers

en	USB

en	Serial Port

en	Mis-click detected, restarting...

en	Parallel Port

en	%d of %d

en	Location: %s

en	Address: %s

en	Output:

en	Map to single monitor

en	Server requires authentication

en	Two Sided

en	Button

en	Switch Modes

en	Paper Type

en	Up

en	Paper Source

en	Down

en	Output Tray

en	Resolution

en	Display Mapping

en	GhostScript pre-filtering

en	Show the overview

en	Pages per side

en	Two-sided

en	Show help options

en	Orientation

en	- System Settings

en	General

en	%s Run '%s --help' to see a full list of available command line options.

en	Page Setup

en	Installable Options

en	Control Center

en	System Settings

en	Job

en	Image Quality

en	Mute

en	Color

en	Settings for %s

en	Finishing

en	Advanced

en	Mode:

en	On _Battery Power

en	Test Page

en	Play sound through

en	Settings for the selected device

en	Test page

en	Auto Select

en	Test:

en	Printer Default

en	Test Sound

en	Record sound from

en	Embed GhostScript fonts only

en	Convert to PS level 1

en	Key

en	Convert to PS level 2

en	GConf key to which this property editor is attached

en	No pre-filtering

en	Callback

en	Manufacturer

en	Issue this callback when the value associated with key gets changed

en	Change set

en	No Active Jobs

en	Power;Sleep;Suspend;Hibernate;Battery;Brightness;Dim;Blank;Monitor;DPMS;Idle;Energy;

en	GConf change set containing data to be forwarded to the gconf client on apply

en	%u Job

en	%u Jobs

en	Conversion to widget callback

en	Clean print heads

en	Callback to be issued when data are to be converted from GConf to the widget

en	Low on toner

en	Conversion from widget callback

en	Out of toner

en	Callback to be issued when data are to be converted to GConf from the widget

en	Low on developer

en	UI Control

en	Out of developer

en	Low on a marker supply

en	Object that controls the property (normally a widget)

en	Property editor object data

en	Out of a marker supply

en	Open cover

en	Custom data required by the specific property editor

en	Property editor data freeing callback

en	Open door

en	Low on paper

en	Callback to be issued when property editor object data is to be freed

en	Out of paper

en	Couldn't find the file '%s'. Please make sure it exists and try again, or choose a different background picture.

en	I don't know how to open the file '%s'. Perhaps it's a kind of picture that is not yet supported. Please select a different picture instead.

en	Offline

en	Please select an image.

en	Stopped

en	_All Settings

en	Waste receptacle almost full

en	Application Menu

en	Waste receptacle full

en	Integrated in menu bar and hidden

en	The optical photo conductor is near end of life

en	The optical photo conductor is no longer functioning

en	Integrated in menu bar and visible

en	Ready

en	Does not accept jobs

en	Printer names cannot contain SPACE, TAB, #, or /

en	Processing

en	Printing Options

en	Printer Details

en	Use Printer by Default

en	Clean Print Heads

en	Remove Printer

en	Model

en	Ink Level

en	Please restart when the problem is resolved.

en	Restart

en	Add Printer…

en	No printers

en	Add a Printer…

en	Sorry! The system printing service doesn’t seem to be available.

en	Formats

en	Search locales…

en	Common Formats

en	All Formats

en	Resume

en	No Search Results

en	Pause

en	Searches can be for countries or languages.

en	Preview

en	Imperial

en	Metric

en	Dates

en	Dates & Times

en	Numbers

en	Measurement

en	Paper

en	Language and format will be changed after next login

en	Logout…

en	The language setting is used for interface text and web pages. Formats is used for numbers, dates, and currencies.

en	Your Account

en	_Language

en	_Formats

en	Login Screen

en	Region & Language

en	No Active Printer Jobs

en	Select your display language and formats

en	Language;Layout;Keyboard;Input;

en	Ask what to do

en	Do nothing

en	Open folder

en	Other Media

en	Select an application for audio CDs

en	Select an application for video DVDs

en	Select an application to run when a music player is connected

en	Select an application to run when a camera is connected

en	Select an application for software CDs

en	audio DVD

en	blank Blu-ray disc

en	blank CD disc

en	blank DVD disc

en	blank HD DVD disc

en	Blu-ray video disc

en	e-book reader

en	HD DVD video disc

en	Picture CD

en	Super Video CD

en	Video CD

en	Select how media should be handled

en	CD _audio

en	_DVD video

en	_Music player

en	_Software

en	_Other Media…

en	_Never prompt or start programs on media insertion

en	Select how other media should be handled

en	_Action:

en	_Type:

en	Removable Media

en	Configure Removable Media settings

en	device;system;default;application;preferred;cd;dvd;usb;audio;video;disc;removable;media;autorun;

en	Select Location

en	_OK

en	Search Locations

en	Folders which are searched by system applications, such as Files, Photos and Videos.

en	Places

en	Bookmarks

en	Add Location

en	No applications found

en	Application Search

en	Include application-provided search results.

en	Folders which are searched by system applications.

en	Search Results

en	Results are displayed according to the list order.

en	Control which applications show search results in the Activities Overview

en	Search;Find;Index;Hide;Privacy;Results;

en	No networks selected for sharing

en	Networks

en	On

en	Off

en	Enabled

en	Active

en	Choose a Folder

en	File Sharing allows you to share your Public folder with others on your current network using: %s

en	When remote login is enabled, remote users can connect using the Secure Shell command: %s

en	Sharing

en	_Computer Name

en	_File Sharing

en	Remote _Desktop

en	_Media Sharing

en	_Remote Login

en	File Sharing

en	_Require Password

en	Remote Login

en	Remote Desktop

en	Remote desktop allows viewing and controlling your desktop from another computer.

en	Enable or disable remote desktop connections to this computer.

en	Remote Control

en	Allows remote connections to control the screen.

en	How to Connect

en	Connect to this computer using the device name or remote desktop address.

en	Remote Desktop Address

en	Authentication

en	The user name and password are required to connect to this computer.

en	User Name

en	Verify Encryption

en	The encryption fingerprint can be seen in connecting clients and should be identical

en	Encryption Fingerprint

en	Media Sharing

en	Share music, photos and videos over the network.

en	Folders

en	The language setting is used for interface text and web pages. Formats are used for numbers, dates, and currencies.

en	Control what you want to share with others

en	share;sharing;ssh;host;name;remote;desktop;media;audio;video;pictures;photos;movies;server;renderer;

en	Enable or disable remote login

en	Authentication is required to enable or disable remote login

en	Custom

en	Bark

en	Drip

en	Glass

en	Sonar

en	Rear

en	Front

en	Testing %s

en	Click a speaker to test

en	System Volume

en	Volume Levels

en	Output

en	Output Device

en	Test

en	Configuration

en	Balance

en	Subwoofer

en	Input

en	Input Device

en	Volume

en	Alert Sound

en	100%

en	Windows software

en	Sound

en	Change sound levels, inputs, outputs, and alert sounds

en	Disconnected

en	Connecting

en	Connected

en	Authorization Error

en	Authorizing

en	Reduced Functionality

en	Connected & Authorized

en	Unknown

en	Connected at:

en	Enrolled at:

en	Failed to authorize device:

en	Failed to forget device:

en	Depends on %u other device

en	Depends on %u other devices

en	Name:

en	Status:

en	UUID:

en	Authorize and Connect

en	Forget Device

en	Error

en	Authorized

en	The Thunderbolt subsystem (boltd) is not installed or not set up properly.

en	Allow direct access to devices such as docks and external GPUs.

en	Only USB and Display Port devices can attach.

en	Thunderbolt could not be detected. Either the system lacks Thunderbolt support, it has been disabled in the BIOS or is set to an unsupported security level in the BIOS.

en	Thunderbolt support has been disabled in the BIOS.

en	Thunderbolt security level could not be determined.

en	Error switching direct mode: %s

en	No Thunderbolt Support

en	Could not connect to the thunderbolt subsystem.

en	Direct Access

en	Pending Devices

en	No devices attached

en	Thunderbolt

en	Manage Thunderbolt devices

en	Thunderbolt;privacy;

en	Cursor Blinking

en	Cursor blinks in text fields.

en	Speed

en	Screen Privacy

en	Cursor blinking speed

en	Restrict Viewing Angle

en	Cursor Size

en	Cursor size can be combined with zoom to make it easier to see the cursor.

en	Screen Settings

en	screen;lock;private;privacy;

en	Click Assist

en	_Simulated Secondary Click

en	Trigger a secondary click by holding down the primary button

en	A_cceptance delay:

en	Short

en	Secondary click delay

en	Long

en	Others

en	Trigger a click when the pointer hovers

en	D_elay:

en	Short

en	Long

en	Motion _threshold:

en	Small

en	Large

en	Repeat Keys

en	Key presses repeat when key is held down.

en	Repeat keys delay

en	Repeat keys speed

en	Typing Assist

en	_Sticky Keys

en	Treats a sequence of modifier keys as a key combination

en	_Disable if two keys are pressed together

en	Beep when a _modifier key is pressed

en	S_low Keys

en	Puts a delay between when a key is pressed and when it is accepted

en	Enable media sharing

en	Short

en	Slow keys typing delay

en	Long

en	Enable personal media sharing

en	Device name copied

en	Beep when a key is pr_essed

en	Beep when a key is _accepted

en	Device address copied

en	Username copied

en	Beep when a key is _rejected

en	Password copied

en	_Bounce Keys

en	Ignores fast duplicate keypresses

en	Short

en	Bounce keys typing delay

en	Long

en	_Enable by Keyboard

en	Turn accessibility features on and off using the keyboard

en	Default

en	Medium

en	Large

en	Larger

en	Largest

en	%d pixel

en	%d pixels

en	_Always Show Accessibility Menu

en	Seeing

en	_High Contrast

en	_Large Text

en	Enable A_nimations

en	Copy

en	Screen _Reader

en	The screen reader reads displayed text as you move the focus.

en	_Sound Keys

en	Beep when Num Lock or Caps Lock are turned on or off.

en	C_ursor Size

en	_Zoom

en	Hearing

en	The encryption fingerprint can be seen in connecting clients and should be identical.

en	_Visual Alerts

en	Screen _Keyboard

en	R_epeat Keys

en	Cursor _Blinking

en	_Typing Assist (AccessX)

en	Pointing & Clicking

en	_Mouse Keys

en	_Locate Pointer

en	_Click Assist

en	Click

en	_Double-Click Delay

en	String

en	Swing

en	Double-Click Delay

en	Visual Alerts

en	Hum

en	_Test flash

en	Fade

en	Use a visual indication when an alert sound occurs.

en	Flash the entire _screen

en	Flash the entire _window

en	Short

en	¼ Screen

en	½ Screen

en	Master volume

en	¾ Screen

en	Long

en	Full Screen

en	Top Half

en	Bottom Half

en	Left Half

en	Right Half

en	Zoom Options

en	_Magnification:

en	Magnifier Position:

en	_Follow mouse cursor

en	_Screen part:

en	Magnifier _extends outside of screen

en	_Keep magnifier cursor centered

en	Magnifier cursor _pushes contents around

en	Magnifier cursor moves with _contents

en	Card;Microphone;Volume;Fade;Balance;Bluetooth;Headset;Audio;Output;Input;

en	Magnifier

en	_Crosshairs:

en	_Overlaps mouse cursor

en	_Thickness:

en	Thin

en	Thick

en	_Length:

en	Co_lor:

en	Authorized at:

en	Crosshairs

en	Color Effects:

en	_White on black:

en	_Brightness:

en	_Contrast:

en	Co_lor

en	None

en	Close notification

en	Full

en	High

en	High

en	Color Effects

en	Make it easier to see, hear, type, point and click

en	Keyboard;Mouse;a11y;Accessibility;Universal Access;Contrast;Cursor;Sound;Zoom;Screen;Reader;big;high;large;text;font;size;AccessX;Sticky;Keys;Slow;Bounce;Mouse;Double;click;Delay;Speed;Assist;Repeat;Blink;visual;hearing;audio;typing;animations;

en	1 hour

en	1 day

en	2 days

en	3 days

en	4 days

en	5 days

en	6 days

en	7 days

en	14 days

en	30 days

en	Empty all items from Trash?

en	All items in the Trash will be permanently deleted.

en	_Empty Trash

en	Delete all the temporary files?

en	All the temporary files will be permanently deleted.

en	_Purge Temporary Files

en	1 day

en	7 days

en	30 days

en	Forever

en	File History

en	File history keeps a record of files that you have used. This information is shared between applications, and makes it easier to find files that you might want to use.

en	File H_istory

en	File _History Duration

en	_Clear History…

en	Trash & Temporary Files

en	Trash and temporary files can sometimes include personal or sensitive information. Automatically deleting them can help to protect privacy.

en	Automatically Delete _Trash Content

en	_Hover Click

en	Automatically Delete Temporary _Files

en	Automatically Delete _Period

en	_Empty Trash…

en	_Delete Temporary Files…

en	File History & Trash

en	Don't leave traces

en	Should match the web address of your login provider.

en	Failed to add account

en	The passwords do not match.

en	No supported way to authenticate with this domain

en	That login name didn’t work. Please try again.

en	That login password didn’t work. Please try again.

en	Failed to log into domain

en	Unable to find the domain. Maybe you misspelled it?

en	Add User

en	Administrator

en	Administrators can add and remove other users, and can change settings for all users. Parental controls cannot be applied to administrators.

en	User sets password on first login

en	Set password now

en	Confirm

en	User accounts which are managed by a company or organisation.

en	Enterprise Login

en	You are Offline

en	Enterprise login allows an existing centrally managed user account to be used on this device. You can also use this account to access company resources on the internet.

en	Browse for more pictures

en	Select a File…

en	Fingerprint Manager

en	Fingerprint

en	_No

en	_Yes

en	Do you want to delete your registered fingerprints so fingerprint login is disabled?

en	No fingerprint device

en	No Fingerprint device

en	Ensure the device is properly connected.

en	Fingerprint Device

en	Choose the fingerprint device you want to configure

en	Fingerprint Login

en	Fingerprint login allows you to unlock and log into your computer with your finger

en	_Delete Fingerprints

en	Fingerprint Enroll

en	the device needs to be claimed to perform this action

en	the device is already claimed by another process

en	you do not have permission to perform the action

en	no prints have been enrolled

en	Failed to communicate with the device during enrollment

en	Failed to communicate with the fingerprint reader

en	Failed to communicate with the fingerprint daemon

en	This Week

en	Last Week

en	%b %e

en	%b %e, %Y

en	%s — %s

en	%s, %s

en	Session Ended

en	Session Started

en	Please choose another password.

en	Please type your current password again.

en	Password could not be changed

en	Change Password

en	Ch_ange

en	Current Password

en	New Password

en	Confirm Password

en	Allow user to change their password on next login

en	Set a password now

en	Cannot automatically join this type of domain

en	No such domain or realm found

en	Cannot log in as %s at the %s domain

en	Invalid password, please try again

en	Low

en	Couldn’t connect to the %s domain: %s

en	Failed to delete user

en	Low

en	Failed to revoke remotely managed user

en	You cannot delete your own account.

en	%s is still logged in

en	Do you want to keep %s’s files?

en	It is possible to keep the home directory, mail spool and temporary files around when deleting a user account.

en	_Delete Files

en	_Keep Files

en	Are you sure you want to revoke remotely managed %s’s account?

en	_Delete

en	Account disabled

en	To be set at next login

en	None

en	Logged in

en	Enabled

en	Failed to contact the accounts service

en	Please make sure that the AccountService is installed and enabled.

en	This panel must be unlocked to change this setting

en	Delete the selected user account

en	To delete the selected user account, click the * icon first

en	Unlock to Add Users and Change Settings

en	Users

en	Your session needs to be restarted for changes to take effect

en	Restart Now

en	_Fingerprint Login

en	A_utomatic Login

en	Account Activity

en	_Administrator

en	Administrators can add and remove other users, and can change settings for all users.

en	_Parental Controls

en	Open the Parental Controls application.

en	Remove User…

en	Other Users

en	Add User…

en	No Users Found

en	Unlock to add a user account.

en	Add or remove users and change your password

en	Login;Name;Fingerprint;Avatar;Logo;Face;Password;Parental Controls;Screen Time;App Restrictions;Web Restrictions;Usage;Usage Limit;Kid;Child;

en	_Enroll

en	Domain Administrator Login

en	usage;recent;history;files;temporary;tmp;private;privacy;trash;purge;retain;

en	In order to use enterprise logins, this computer needs to be enrolled in the domain. Please have your network administrator type their domain password here.

en	Administrator _Name

en	Administrator Password

en	Failed to register account

en	Manage user accounts

en	Authentication is required to change user data

en	Failed to join domain

en	The new password needs to be different from the old one.

en	Try changing some letters and numbers.

en	Try changing the password a bit more.

en	A password without your user name would be stronger.

en	Try to avoid using your name in the password.

en	Try to avoid some of the words included in the password.

en	Try to avoid common words.

en	Try to avoid reordering existing words.

en	Try to use more numbers.

en	Try to use more uppercase letters.

en	Try to use more lowercase letters.

en	Try to use more special characters, like punctuation.

en	Try to use a mixture of letters, numbers and punctuation.

en	User accounts which are managed by a company or organization.

en	Try to avoid repeating the same character.

en	Try to avoid repeating the same type of character: you need to mix up letters, numbers and punctuation.

en	Try to avoid sequences like 1234 or abcd.

en	Password needs to be longer. Try to add more letters, numbers and punctuation.

en	Mix uppercase and lowercase and try to use a number or two.

en	Adding more letters, numbers and punctuation will make the password stronger.

en	Authentication failed

en	The new password is too short

en	The new password is too simple

en	The old and new passwords are too similar

en	The new password has already been used recently.

en	The new password must contain numeric or special characters

en	The old and new passwords are the same

en	Your password has been changed since you initially authenticated!

en	The new password does not contain enough different characters

en	Unknown error

en	The username should usually only consist of lower case letters from a-z, digits and the following characters: - _

en	Sorry, that user name isn’t available. Please try another.

en	The username is too long.

en	Map Buttons

en	Map buttons to functions

en	_Close

en	Please tap the target markers as they appear on screen to calibrate the tablet.

en	Mis-click detected, restarting…

en	Failed to list fingerprints: %s

en	Button %d

en	Failed to delete saved fingerprints: %s

en	Left thumb

en	Send Keystroke

en	Switch Monitor

en	Left middle finger

en	Show On-Screen Help

en	_Left index finger

en	Left ring finger

en	Tablet mounted on laptop panel

en	Left little finger

en	Tablet mounted on external display

en	External tablet device

en	Right thumb

en	Right middle finger

en	_Right index finger

en	Tablet Mode

en	Right ring finger

en	Use absolute positioning for the pen

en	Right little finger

en	Left Hand Orientation

en	Unknown Finger

en	Tablet and Express Keys™ are rotated for left hand use

en	Map to Monitor

en	Complete

en	Keep Aspect Ratio

en	Fingerprint device disconnected

en	Only use a portion of the tablet surface to keep monitor aspect ratio

en	Fingerprint device storage is full

en	Calibrate

en	Failed to enroll new fingerprint

en	Failed to start enrollment: %s

en	No tablet detected

en	Please plug in or turn on your Wacom tablet.

en	Failed to enroll new fingerprint

en	Failed to stop enrollment: %s

en	Soft

en	Repeatedly lift and place your finger on the reader to enroll your fingerprint

en	_Re-enroll this finger…

en	Stylus tip pressure

en	Scan new fingerprint

en	Failed to release fingerprint device %s: %s

en	Button 1

en	Button 2

en	Problem Reading Device

en	Button 3

en	Failed to claim fingerprint device %s: %s

en	Eraser Pressure Feel

en	Failed to get fingerprint devices: %s

en	Eraser pressure

en	Default

en	Middle Mouse Button Click

en	Right Mouse Button Click

en	Forward

en	%k:%M

en	Airbrush stylus with pressure, tilt, and integrated slider

en	Airbrush stylus with pressure, tilt, and rotation

en	Standard stylus with pressure and tilt

en	Standard stylus with pressure

en	Wacom Tablet

en	%s — Account Activity

en	Set button mappings and adjust stylus sensitivity for graphics tablets

en	Previous

en	Next

en	Tablet;Wacom;Stylus;Eraser;Mouse;

en	New shortcut…

en	Access Points

en	APN

en	Operation Cancelled

en	Error: Access denied changing settings

en	Not Registered

en	Registered

en	Roaming

en	Searching

en	Denied

en	Modem Details

en	Modem Status

en	Carrier

en	Network Type

en	Network Status

en	Own Number

en	Device Details

en	Firmware Version

en	Deleting a user while they are logged in can leave the system in an inconsistent state.

en	2G Only

en	3G Only

en	4G Only

en	2G, 3G, 4G (Preferred)

en	2G, 3G (Preferred), 4G

en	2G (Preferred), 3G, 4G

en	2G, 3G, 4G

en	3G, 4G (Preferred)

en	3G (Preferred), 4G

en	3G, 4G

en	2G, 4G (Preferred)

en	2G (Preferred), 4G

en	2G, 4G

en	2G, 3G (Preferred)

en	2G (Preferred), 3G

en	2G, 3G

en	Unknown

en	Unlock SIM card

en	Unlock

en	Please provide PIN code for SIM %d

en	Enter PIN to unlock your SIM card

en	Please provide PUK code for SIM %d

en	Edit avatar

en	Full name

en	Enter PUK to unlock your SIM card

en	Edit

en	Wrong password entered. You have %1$u try left

en	Wrong password entered. You have %1$u tries left

en	You have %u try left

en	You have %u tries left

en	Wrong password entered.

en	PUK code should be an 8 digit number

en	Enter New PIN

en	PIN code should be a 4-8 digit number

en	Unlocking…

en	No SIM

en	Insert a SIM card to use this modem

en	SIM Locked

en	_Mobile Data

en	Access data using mobile network

en	_Data Roaming

en	Use mobile data when roaming

en	_Network Mode

en	N_etwork

en	Advanced

en	_Access Point Names

en	_SIM Lock

en	Lock SIM with PIN

en	M_odem Details

en	Phone failure

en	No connection to phone

en	Operation not allowed

en	Operation not supported

en	SIM not inserted

en	SIM PIN required

en	SIM PUK required

en	SIM failure

en	SIM busy

en	Incorrect password

en	SIM PIN2 required

en	SIM PUK2 required

en	Not found

en	No network service

en	Network timeout

en	GPRS services not allowed

en	Unspecified GPRS error

en	Action Cancelled

en	Access denied

en	Unknown Error

en	Network Mode

en	_Set

en	Close

en	_Automatic

en	Choose Network

en	Refresh Network Providers

en	SIM %d

en	Enable Mobile Network

en	No WWAN Adapter Found

en	Wireless Wan is disabled when airplane mode is on

en	_Turn off Airplane Mode

en	Data Connection

en	SIM card used for internet

en	To edit a shortcut, choose the “Send Keystroke” action, press the keyboard shortcut button and hold down the new keys or press Backspace to clear.

en	SIM Lock

en	GNOME Settings Sound Panel

en	_Next

en	_Lock SIM with PIN

en	GNOME Settings Mouse & Touchpad Panel

en	GNOME Settings Background Panel

en	Change PIN

en	Enter current PIN to change SIM lock settings

en	GNOME Settings Keyboard Panel

en	Mobile Network

en	Application defined

en	Configure Telephony and mobile data connections

en	cellular;wwan;telephony;sim;mobile;

en	Utility to configure the GNOME desktop

en	Settings is the primary interface for configuring your system.

en	The GNOME Project

en	Display version number

en	External pad device

en	Enable verbose mode

en	All Displays

en	Search for the string

en	List possible panel names and exit

en	Panel to display

en	[PANEL] [ARGUMENT…]

en	Privacy

en	Available panels:

en	All Settings

en	Primary Menu

en	Warning: Development Version

en	This version of Settings should only be used for development purposes. You may experience incorrect system behavior, data loss, and other unexpected issues.

en	Help

en	General

en	Tip Pressure Feel

en	Quit

en	Search

en	Firm

en	Panels

en	Go back to previous panel

en	Cancel search

en	Preferences;Settings;

en	The identifier for the last Settings panel to be opened

en	The identifier for the last Settings panel to be opened. Unrecognised values will be ignored and the first panel in the list selected.

en	Show warning when running a development build of Settings

en	Whether Settings should show a warning when running a development build.

en	Initial state of the window

en	A tuple containing the initial width, height and maximized state of the application window.

en	%u Output

en	%u Outputs

en	%u Input

en	%u Inputs

en	System Sounds

en	Error: Mobile Equipment Error

en	5G Only

en	2G, 3G, 4G, 5G (Preferred)

en	2G, 3G, 4G (Preferred), 5G

en	2G, 3G (Preferred), 4G, 5G

en	2G (Preferred), 3G, 4G, 5G

en	2G, 3G, 4G, 5G

en	3G, 4G, 5G (Preferred)

en	3G, 4G (Preferred), 5G

en	3G (Preferred), 4G, 5G

en	3G, 4G, 5G

en	2G, 4G, 5G (Preferred)

en	2G, 4G (Preferred), 5G

en	2G (Preferred), 4G, 5G

en	2G, 4G, 5G

en	2G, 3G, 5G (Preferred)

en	2G, 3G (Preferred), 5G

en	2G (Preferred), 3G, 5G

en	2G, 3G, 5G

en	2G, 5G (Preferred)

en	2G (Preferred), 5G

en	2G, 5G

en	3G, 5G (Preferred)

en	3G (Preferred), 5G

en	3G, 5G

en	4G, 5G (Preferred)

en	4G (Preferred), 5G

en	4G, 5G

en	Roaming not allowed in this location area

en	No Error

en	Make sure you have a Wireless Wan/Cellular device

en	Settings categories